TCA13807 John Deere Spindle

Youxmoto Mower Deck Blade Spindle Assembly TCA13807, AM124339 for John Deere AM141457, TCA25832 48", 54", 60" Deck 4200, 4210, 4300, 717E, 737 757 1550 1570 1575
Youxmoto Spindle Replaces OEM Part Numbers: John Deere AM124339, AM141457, TCA13807 , TCA25832 || Compatible with John Deere 4200, 4210, 4300, 4310, 4400, 4410, F620, F680, F687, M653, M655, M665 with 60" deck || Compatible with John Deere X465, X475, X485, X495, X575, X585, X595, X700, X720, X724, X728, X740, X744, X748 with 60" deck || Compatible with John Deere 657, 657A, 667, 667A, 717E, 727, 727A, 737, 757, 777, 797, 1550, 1570, 1575, 1580, 1585 with 60" deck || Spindle Specs: Height: 6 5/8"(168mm) (excluding top protrusion), Pulley OD: 6"(152mm)

OCPTY Spindle Assembly w/PULLEY BOLT Replaces for John Deere TCA13807 TCA25832 set of 2
OCPTY FITMENT/COMPATIBILITY- Lawn Mower Spindles kit for John Deere 4200, 4210, 4300, 4310, 4400, 4410, F620, F680, F687, M653, M655, M665 with 60" deck; for John Deere X465, X475, X485, X495, X575, X585, X595, X700, X720, X724, X728, X740, X744, X748 with 60" deck; for John Deere 657, 657A, 667, 667A, 717E, 727, 727A, 737, 757, 777, 797, 1550, 1570, 1575, 1580, 1585 with 60" deck. || THE ROLE OF THE SPINDLES- Lawn mower spindles are essential parts of the mower's cutting deck. The mower deck spindles and pulleys work together to rotate the blades for a smooth even cut. If any parts of the spindle assembly are bent or broken, it can cause the blades to spin unevenly, or prevent them from spinning at all.When you need to replace a spindle on your riding mower, OCPTY has all the parts you need. Our spindle shafts will get your mower back into perfect cutting shape. || SPINDLE REPLACEMENT-Since demolishing the old spindle assembly is often the most difficult part of the replacement process, reassembly of the unit should be a breeze. Insert the new spindle into the center of the spindle housing. Reattach the spindle housing to the mower deck with the bolts that you separated previously. Reinstall the blade and pulley and tighten them into place. || SPINDLE DEMOLISHING- To access the spindle easily, demolished the deck from the mower. Demolished the blade and pulley from the spindle and lay them aside. When a spindle has been in place on the mower for a number of years, it may be difficult to disassemble. If the bolts that hold the spindle assembly in place seem stuck in place, apply a penetrating oil and allow it to soak for 30 minutes or so before attempting to disassemble the bolts again. || TIPS FOR SPINDLE BEARINGS- Replace the spindle bearings if the pulley wobbles. If the pulley didn’t feel secure and flush when you demolished it, it’s likely because the bearings inside the spindle are worn out. Rather than replacing the entire spindle, you can simply install new bearings.However, if the spindle is broken or bent, replace it entirely.

PetMigo TCA13807 Spindle Assembly for John Deere 60 inch Deck X Series 737 757 1550 1570 1575 4410 AM124339 TCU39458 TCA25832
PetMigo Spindle Replaces OEM Part Numbers: John Deere AM124339, AM141457, TCA13807, TCA25832, TCU39458 || Fits John Deere Models: 4200, 4210, 4300, 4310, 4400, 4410, F620, F680, F687, M653, M655, M665 with 60" deck || Fits John Deere Models:X465, X475, X485, X495, X575, X585, X595, X700, X720, X724, X728, X740, X744, X748 with 60" deck || Fits John Deere Models: 657, 657A, 667, 667A, 717E, 727, 727A, 737, 757, 777, 797, 1550, 1570, 1575, 1580, 1585 with 60" deck || Specs Height 6 5/8"