LOAD CONTROL [02E04] 55 THREE-POINT HITCH, SWAY BLOCKS AND DRAWBAR JD400 Series Tractors PC973 in LOADER, TWO-WHEEL DRIVE 400

№	Number	Qty	Name	Options
1	T22653	2	Plug	(WITHOUT ROCKSHAFT)
2	F3336R	2	SNAP RING	(USE WITH T26599 LOAD CONTROL SHAFT)
3	T22096	2	BUSHING
4	T22095	2	WASHER
5	R460R	2	O-Ring
6	T22094	2	BUSHING
7	T23216	1	CAP SCREW	(WITHOUT INDEPENDENT PTO)
7	19H2643	1	Cap Screw	1/2" X 7/8", (WITHOUT ROCKSHAFT) (WITHOUT INDEPENDENT PTO)
8	14H856	1	Nut	1/2", (WITHOUT INDEPENDENT PTO)
9	A4365R	1	O-Ring	(WITHOUT INDEPENDENT PTO)
10	T21681	1	DOWEL PIN
11	M360T	1	SNAP RING
12	T21487	1	LEVER
13	R72653	2	Snap Ring	(SUB FOR M2396T)
14	T29311	1	SET SCREW	1/2" X 1-1/2"
15	AT19848	1	EXTENSION
16	34H279	1	SPRING PIN	3/16" X 13/16"
17	T28551	1	CAM FOLLOWER	(SUB FOR T22317)
18	T21955	1	EXTENSION SPRING
19	T24690	1	PIN
20	T21680	1	Pin Fastener
21	[]	1		( T22651 NO LONGER AVAILABLE) (SUB T26599, (2) T26597, (2) T16464 AND (2) 19H3131)
22	T30917	1	PIN	FRONT (WITH INDEPENDENT PTO)
23	T30918	1	PIN	REAR (WITH INDEPENDENT PTO)
24	A4365R	1	O-Ring	(WITH INDEPENDENT PTO)
25	14H882	1	Nut	5/16", (WITH INDEPENDENT PTO)
26	19H3120	1	CAP SCREW	5/16" X 1-1/2", (WITH INDEPENDENT PTO)
27	14H856	1	Nut	1/2"
28	A4365R	1	O-Ring	(WITHOUT INDEPENDENT PTO)
29	T30918	1	PIN	REAR (WITHOUT INDEPENDENT PTO)
30	L26937	1	PIN	(SUB FOR T26599) (ALSO ORDER (2) R47061, (2) R47063 AND (2) 11M7082)
31	T26597	2	RETAINER	(USE WITH T26599 CONTROL SHAFT)
32	T16464	2	Lock Nut	(USE WITH T26599 CONTROL SHAFT)
33	19H1901	2	Cap Screw	5/16" X 2", (USE WITH T26599)
34	R47063	2	PIN	(USE WITH L26937 CONTROL SHAFT)
35	R47061	2	BUSHING	(USE WITH L26937 CONTROL SHAFT)
36	11H234	2	Cotter Pin	3/32" X 1", (USE WITH L26937)
37	R66197	2	Thrust Washer	(SUB FOR R43216)