AtlasCarParts

CLUTCH PEDAL AND LINKAGE (WITHOUT REVERSER) [01F18] 35 TRANSMISSION, DIFFERENTIAL AND REAR AXLE JD400 Series Tractors PC973 in LOADER, TWO-WHEEL DRIVE 400


  1. Home
  2. Construction And Forestry
  3. LOADER, TWO-WHEEL DRIVE
  4. LOADER, TWO-WHEEL DRIVE 400
  5. JD400 Series Tractors PC973
  6. 35 TRANSMISSION, DIFFERENTIAL AND REAR AXLE
  7. CLUTCH PEDAL AND LINKAGE (WITHOUT REVERSER) [01F18]
CLUTCH PEDAL AND LINKAGE (WITHOUT REVERSER) [01F18]

Parts list:

 №  Number Qty Name Options
1   AL27229   1  PEDAL (MARKED L32030) WITH BUSHING (SUB FOR AT22096, MARKED T22000) (SUB FOR T22528)  
2   T21452   1  EXTENSION SPRING  
3   T22529   1  ARM (CONTINUOUS DRIVE SINGLE 540 R.P.M. PTO OR CONTINUOUS DRIVEN DUAL 540-1000 R.P.M. PTO)  
4   24H1451   1  Washer 1-1/32" X 1-3/4" X 0.060"  
5   A602R   1  Snap Ring  
6   19H3579   1  Cap Screw 1/2" X 1-3/8"  
7   T26198   1  WASHER  
8   M80373   1  Yoke (SUB FOR L324T)  
9   14H774   1  Nut 3/8"  
10A   AT20383   1  YOKE (SUB ONE R73330 AND ONE 24H1303, THIS APPLICATION)  
10B   T63020   1  ROD (SUB R73330)  
10C   R73330   1  ROD (SUB AR102895, R65563 AND 11M7059)  
10D   AR102895   1  ROD  
11   C1067R   1  PIN FASTENER (USE IF AVAILABLE)  
11   R65563   1  Pin Fastener (SUB FOR C1067R)  
12   11H211   2  COTTER PIN 1/8" X 3/4"  
13   T21998   1  BUSHING  
14   T21448   1  PIN  
15   C1067R   1  PIN FASTENER (USE IF AVAILABLE) (USED WITH AT20383)  
15   R65563   1  Pin Fastener (SUB FOR C1067R)  
16   24M7096   1  Washer 0.413" X 0.709" X 0.063", (USE WHEN R73330 HAS BEEN INSTALLED AS A REPLACEMENT PART)  
17   24H1325   1  Washer 15/32" X 59/64" X 0.065"  

Next page:

35-50
MID POWER SHAFT SHIFTER LEVER [01H17]
MID POWER SHAFT SHIFTER LEVER [01H17]
35-50
REAR POWER SHAFT SHIFTER LINKAGE [01H17]
REAR POWER SHAFT SHIFTER LINKAGE [01H17]
35-51
POWER SHAFT COVER (WHEN NOT EQUIPPED WITH A PTO) [01H18]
POWER SHAFT COVER (WHEN NOT EQUIPPED WITH A PTO) [01H18]
35-51
POWER SHAFT SHIELD AND GUARD [01H18]
POWER SHAFT SHIELD AND GUARD [01H18]
35-52
BELT PULLEY [01H19]
BELT PULLEY [01H19]
35-49A
SINGLE 540 RPM PTO IMPROVEMENT KIT [01H16]
SINGLE 540 RPM PTO IMPROVEMENT KIT [01H16]
35-49
GEARS AND SHAFTS (540 - 1000 R.P.M. INDEPENDENT PTO) (WITHOUT MID PTO) [01H15]
GEARS AND SHAFTS (540 - 1000 R.P.M. INDEPENDENT PTO) (WITHOUT MID PTO) [01H15]
35-48
GEARS AND SHAFTS (DUAL 540-1000 R.P.M. PTO WITH MID PTO) (WITHOUT INDEPENDENT PTO) [01H14]
GEARS AND SHAFTS (DUAL 540-1000 R.P.M. PTO WITH MID PTO) (WITHOUT INDEPENDENT PTO) [01H14]
35-47
GEARS AND SHAFTS (SINGLE 540 R.P.M. PTO WITH MID PTO) (WITHOUT INDEPENDENT PTO) [01H13]
GEARS AND SHAFTS (SINGLE 540 R.P.M. PTO WITH MID PTO) (WITHOUT INDEPENDENT PTO) [01H13]
35-46
GEARS AND SHAFTS (540-1000 R.P.M. INDEPENDENT PTO) (WITH MID PTO) [01H12]
GEARS AND SHAFTS (540-1000 R.P.M. INDEPENDENT PTO) (WITH MID PTO) [01H12]