CRANKSHAFT AND IDLER GEARS [01B06] 10 ENGINE JD400 Series Tractors PC973 in LOADER, TWO-WHEEL DRIVE 400

№	Number	Qty	Name	Options
1	R48685	1	Dowel Pin	(SUB FOR A120R)
2	[]	1		RE33197,MARKED R121018 IS NO LONGER AVAILABLE (SUB FOR AT18030,MARKED T23519 OR T23480,AND RE57664,MARKED R81959)(DIESEL)SUB RE48748-KIT
2	AT21047	1	CRANKSHAFT	(MARKED T23483) (GASOLINE)
3A	T20037	2	THRUST WASHER	(SUB T26324)
3B	T26324	2	THRUST WASHER
4A	T20036	2	SHAFT	(SUB T26323)
4B	R109863	1	Shaft	(SUB FOR T26323 AND R89824)
5	34H283	1	Spring Pin	3/16" X 1-1/8"
6	AR91660	1	Gear	(MARKED R70182) CRANKSHAFT UPPER IDLER, WITH BUSHING (55 TEETH)
7	T20034	1	Bushing
8A	T20038	2	THRUST WASHER	(SUB T26326)
8B	T26326	2	THRUST WASHER
9	T20291	2	WEAR PLATE
10	T20290	2	SHIM
11A	19H1805	1	CAP SCREW	1/2" X 2-1/4"
11B	T26327	1	Screw
12	19H2993	1	Cap Screw	1/2" X 1-1/2"
13	T20217	1	Washer
14	T24440	1	PULLEY	(SUB ONE R59312 AND TWO R34360 SPECIAL SCREWS THIS APPLICATION)
14	R59312	1	PULLEY	(SUB FOR T25365)
15	AT21608	1	SEAL	(SUB AR67942)
15	AR67942	1	Seal
16	T20046	1	Oil Slinger
17	T20094	1	Helical Gear	(24 TEETH)
18	26H72	1	Shaft Key	1/8" X 5/8"
19	T23604	1	SHAFT KEY
20A	T26325	2	SCREW
20B	19H3183	1	CAP SCREW	HS, SAE 8, 1/2" X 2-1/8"
21	19H2644	1	Cap Screw	1/2" X 2-1/2"
22	T20136	1	FITTING
23	T20034	1	Bushing
23	T26321	1	Bushing
24	AT18039	1	GEAR	(MARKED T20135) CRANKSHAFT LOWER IDLER, WITH BUSHING (45 TEETH) (SUB AT24252)
24	AT24252	1	GEAR	(MARKED T26322) CRANKSHAFT, LOWER IDLER, WITH BUSHING (45 TEETH)
25	34H286	1	Spring Pin	3/16" X 1-1/2"
26A	24H1890	1	Washer	19/32" X 1" X 1/4"
26B	R100105	1	Washer
27	T20445	1	PLUG	THRUST WITHOUT REVERSER
28	T26323	1	SHAFT
28	R109863	1	Shaft	(SUB FOR R89824)
29	14H865	1	Nut	1/2"