AtlasCarParts

BELT PULLEY [01I14] 35 TRANSMISSION, DIFFERENTIAL AND REAR AXLE JD300 Series Tractors PC972 in TRACTOR 300


  1. Home
  2. Agriculture
  3. TRACTOR
  4. TRACTOR 300
  5. JD300 Series Tractors PC972
  6. 35 TRANSMISSION, DIFFERENTIAL AND REAR AXLE
  7. BELT PULLEY [01I14]
BELT PULLEY [01I14]

Parts list:

 №  Number Qty Name Options
1   AT12431   1  Seal  
2   T29243   1  BEARING HOUSING W/O BEARING (SUB FOR T22704) (WITHOUT INDEPENDENT PTO)  
2   T29550   1  Bearing Housing W/O Bearing (WITH INDEPENDENT PTO)  
3   19H3579   6  Cap Screw 1/2" X 1-3/8"  
4   12H301   10  Lock Washer 1/2"  
5   19H2644   4  Cap Screw 1/2" X 2-1/2"  
6   R44372   3  SHIM PAPER .13 MM (.005")  
6   R44361   1  SHIM STEEL .13 MM (.005")  
6   T13341   1  SHIM STEEL .25 MM (.010")  
7   JD8247   1  Bearing Cup  
8   JD8922   1  BEARING CONE  
9   26H85   1  Shaft Key 1/4" X 1"  
10   T22999   1  HUB (540 R.P.M. PTO)  
10   T13329   1  HUB (1000 R.P.M. PTO)  
11   []   1  ( T23000, NO LONGER AVAILABLE) (SUB AT28049) (26 TEETH) (540 R.P.M. PTO)  
11   T13330   1  GEAR (SUB R63692) DRIVE GEAR AND ONE R63691 BELT PULLEY SHAFT) (26 TEETH) (1000 R.P.M. PTO)  
11   R63692   1  Gear (USED WHEN R63691 BELT PULLEY SHAFT HAS BEEN INSTALLED AS A REPLACEMENT PART)  
12   M2206T   1  CAP  
13   JD7438   1  BEARING CUP  
14   JD8135   1  BEARING CONE  
15   T13331   1  Shim (SUB FOR AT16887) .08 MM (.003")  
15   T13332   3  Shim .13 MM (.005")  
15   T13333   4  Shim .25 MM (.010")  
16   T13471   1  PIN  
17   T29242   1  CASE (SUB FOR T13326)  
18   A4827R   1  Washer  
19   R26727   1  DRAIN PLUG  
20   AT124396   1  SEAL (SUB FOR AT16887)  
21   T18718   1  PULLEY 12" DIA.  
22   R30399   1  Washer (SUB FOR T18996)  
23   14H920   1  Nut 1"  
24   []   1  (1000 R.P.M.) (SUB R63692) DRIVE GEAR AND ONE R63691 BELT PULLEY SHAFT) ( T18717 - NO LONGER AVAILABLE)  
24   T22998   1  SHAFT (SUB AT28049) (540 R.P.M.)  
24   []   1  (USED WHEN R63692 DRIVE GEAR HAS BEEN INSTALLED. R63691 NO LONGER AVAILABLE  
25   26H93   1  Shaft Key 1/4" X 1-1/4"  
26   11M7032   1  Cotter Pin 5 X 50 MM  
27   JD8969   1  BEARING CONE  
28   JD7418   2  Bearing Cup  
29   T13325   2  SNAP RING  
30   JD8982   1  Bearing Cone  
31   AT28049   1  SHAFT (23 TEETH) (540 R.P.M. PTO)  

Next page:

35-63
REAR AXLE HOUSING AND SHAFT [01I15]
REAR AXLE HOUSING AND SHAFT [01I15]
35-64
PLANETARY PINION CARRIER [01I16]
PLANETARY PINION CARRIER [01I16]
35-7
CLUTCH DISCONNECT AND FLYWHEEL (WITH REVERSER) [01G01]
CLUTCH DISCONNECT AND FLYWHEEL (WITH REVERSER) [01G01]
35-8
ENGINE CLUTCH AND FLYWHEEL (NO PTO OR WITH TRANSMISSION DRIVEN PTO) (WITHOUT REVERSER) [01G02]
ENGINE CLUTCH AND FLYWHEEL (NO PTO OR WITH TRANSMISSION DRIVEN PTO) (WITHOUT REVERSER) [01G02]
35-9
ENGINE CLUTCH AND FLYWHEEL (WITH INDEPENDENT PTO) (WITHOUT REVERSER) [01G03]
ENGINE CLUTCH AND FLYWHEEL (WITH INDEPENDENT PTO) (WITHOUT REVERSER) [01G03]
35-61
POWER SHAFT SHIELD AND GUARD [01I13]
POWER SHAFT SHIELD AND GUARD [01I13]
35-61
POWER SHAFT COVER (WHEN NOT EQUIPPED WITH PTO) [01I13]
POWER SHAFT COVER (WHEN NOT EQUIPPED WITH PTO) [01I13]
35-60
REAR POWER SHAFT SHIFTER LINKAGE [01I12]
REAR POWER SHAFT SHIFTER LINKAGE [01I12]
35-6
CLUTCH PEDAL AND SHAFT (WITH REVERSER) [01F25]
CLUTCH PEDAL AND SHAFT (WITH REVERSER) [01F25]
35-59
MID POWER SHAFT SHIFTER LEVER [01I11]
MID POWER SHAFT SHIFTER LEVER [01I11]