AtlasCarParts

THRUST CAPACITY IMPROVEMENT KIT (540 RPM PTO) [02E04] 50 POWER TRAIN 2020 Tractor PC971 in TRACTOR 2020


  1. Home
  2. Agriculture
  3. TRACTOR
  4. TRACTOR 2020
  5. 2020 Tractor PC971
  6. 50 POWER TRAIN
  7. THRUST CAPACITY IMPROVEMENT KIT (540 RPM PTO) [02E04]
THRUST CAPACITY IMPROVEMENT KIT (540 RPM PTO) [02E04]

Parts list:

 №  Number Qty Name Options
1   R69509   1  Shaft  
2   R69511   1  Bushing  
3   JD9125   1  Bearing Cup  
4   JD9065   1  Bearing Cone  
5   R69510   2  Spacer  
6   AL56820   1  Seal (SUB FOR T22069)  
7   R69513   AR  Shim 0.13 MM (.005") (SUB AT146240)  
7   R69515   AR  Shim 0.25 MM (.010") (SUB AT146240)  
7   R69516   AR  Shim 0.50 MM (.020") (SUB AT146240)  
7   R69514   AR  Shim 0.13 MM (.005") PAPER, (SUB AT146240)  
8   R69512   1  Bearing Housing W/O Bearing  
9   AR93928   1  KIT  

Next page:

50-8
CLUTCH HOUSING TO TRANSMISSION CASE GASKET KIT [02B11]
CLUTCH HOUSING TO TRANSMISSION CASE GASKET KIT [02B11]
50-80
REAR POWERSHAFT SHIFTER LINKAGE [02E05]
REAR POWERSHAFT SHIFTER LINKAGE [02E05]
50-81
MID POWERSHAFT SHIFTER LEVER [02E06]
MID POWERSHAFT SHIFTER LEVER [02E06]
50-82
SHIFTER LEVERS (LOW PROFILE) (TRACTOR SERIAL NO. -103225) [02E07]
SHIFTER LEVERS (LOW PROFILE) (TRACTOR SERIAL NO. -103225) [02E07]
50-83
REAR POWERSHAFT SHIFTER LINKAGE (LOW PROFILE) (TRACTOR SERIAL NO. -103255) [02E08]
REAR POWERSHAFT SHIFTER LINKAGE (LOW PROFILE) (TRACTOR SERIAL NO. -103255) [02E08]
50-78
GEARS AND SHAFTS (540-1000 RPM PTO WITH MID-PTO) (LESS INDEPENDENT PTO) [02E03]
GEARS AND SHAFTS (540-1000 RPM PTO WITH MID-PTO) (LESS INDEPENDENT PTO) [02E03]
50-77
GEARS AND SHAFTS (540-1000 RPM MID-PTO) (INDEPENDENT PTO) [02E02]
GEARS AND SHAFTS (540-1000 RPM MID-PTO) (INDEPENDENT PTO) [02E02]
50-76
GEARS AND SHAFTS (540 RPM PTO WITH MID-PTO) (LESS INDEPENDENT PTO) [02E01]
GEARS AND SHAFTS (540 RPM PTO WITH MID-PTO) (LESS INDEPENDENT PTO) [02E01]
50-75
GEARS AND SHAFTS (540 RPM PTO) (INDEPENDENT PTO) [02D25]
GEARS AND SHAFTS (540 RPM PTO) (INDEPENDENT PTO) [02D25]
50-74
GEARS AND SHAFTS (540-1000 RPM LESS MID-PTO) (INDEPENDENT PTO) [02D24]
GEARS AND SHAFTS (540-1000 RPM LESS MID-PTO) (INDEPENDENT PTO) [02D24]