Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | AR92893 | 1 | SEAL | REAR, WITH WEAR RING (SUB FOR AT22965) |
| 2 | R48685 | 1 | Dowel Pin | (SUB FOR A120R) |
| 3 | [] | 1 | RE45541, MARKED R108679 NO LONGER AVAILABLE (SUB FOR AT22562, MARKED T23266OR T23267) SUB RE54130CRANKSHAFT KIT. (HA-D, HB-D, NA-D) | |
| 3 | AT22560 | 1 | Crankshaft | (MARKED T23264)WITH GEAR, KEY, AND DOWEL PIN (HA-G, HA-L, HB-G, HB-L, HC-G, HD-G, NA-G, NA-L) |
| 4 | 26H72 | 1 | Shaft Key | 1/8" X 5/8" |
| 5 | T20094 | 1 | Helical Gear | (24 TEETH) |
| 6A | T20037 | 2 | THRUST WASHER | (SUB T26324) |
| 6B | T26324 | 2 | THRUST WASHER | INNER |
| 7A | T20036 | 2 | SHAFT | (SUB T26323) |
| 7B | R109863 | 1 | Shaft | (SUB FOR T26323 AND R89824) |
| 8 | 34H283 | 1 | Spring Pin | 3/16" X 1-1/8" |
| 9 | AR91660 | 1 | Gear | (55 TEETH) (MARKED R70182 ) (SUB FOR AT18009 ) (MARKED T20029) |
| 10 | T20034 | 1 | Bushing | |
| 11A | T20038 | 2 | THRUST WASHER | (SUB T26326) |
| 11B | T26326 | 2 | THRUST WASHER | OUTER |
| 12 | T20291 | 2 | WEAR PLATE | |
| 13 | T20290 | 2 | SHIM | .38 MM (.015") |
| 14A | 19H1805 | 1 | CAP SCREW | 1/2" X 2-1/4" |
| 14B | T26327 | 1 | Screw | |
| 15 | T20046 | 1 | Oil Slinger | |
| 16 | R81989 | 1 | Sleeve | (SUB FOR T23270 ) (ALSO ORDER H35244) |
| 16 | H35244 | 1 | Ring | (USE WITH R81989) |
| 17 | AT21608 | 1 | SEAL | (SUB AR67942) |
| 17 | AR67942 | 1 | Seal | FRONT |
| 18 | T25211 | 1 | Pulley | (HA-D, HA-G, HA-L, HB-D, HB-G, HB-L, HC-G) |
| 18 | AR94355 | 1 | PULLEY WITH DAMPENER | (NA-D) (SUB FOR AT23746) |
| 18 | T25486 | 1 | Pulley | (NA-G, NA-L) |
| 18 | R56727 | 1 | Pulley | (SUB FOR T31218)(HD-G) |
| 19 | T20217 | 1 | Washer | |
| 20 | 19H2993 | 1 | Cap Screw | 1/2" X 1-1/2" |
| 21 | 19H2644 | 1 | Cap Screw | 1/2" X 2-1/2" |
| 22A | T26325 | 2 | SCREW | |
| 22B | 19H3183 | 1 | CAP SCREW | 1/2" X 2-1/8" HS, SAE 8, 1/2" X 2-1/8" |
| 23 | T20034 | 1 | Bushing | |
| 23 | T26321 | 1 | Bushing | |
| 24 | AT18039 | 1 | GEAR | (MARKED T20135)(45 TEETH) (SUB AT24252) |
| 24 | AT24252 | 1 | GEAR | (MARKED T26322)CRANKSHAFT LOWER IDLER, WITH BUSHING (45 TEETH) |
| 25 | 34H286 | 1 | Spring Pin | 3/16" X 1-1/2" |
| 26A | 24H1890 | 1 | Washer | 19/32" X 1" X 1/4" |
| 26B | R100105 | 1 | Washer | |
| 27 | 26H27 | 1 | Shaft Key | 5/16" X 1-1/8" |
| 28 | T20136 | 1 | FITTING | |
| 29 | T26323 | 1 | SHAFT | |
| 29 | R109863 | 1 | Shaft | (SUB FOR R89824) |
| 30 | 14H865 | 1 | Nut | 1/2" |
