AtlasCarParts

HYDRAULICS FOR RADIAL RIPPER ON 450G AND 455G CRAWLER [B05] 10 RIPPERS, HYDRAULIC--3100 AND 3110 3100 and 3110 (for 350B and 450B) Hydraulic Ripper PC931 in RIPPER 3110


  1. Home
  2. Agriculture
  3. RIPPER
  4. RIPPER 3110
  5. 3100 and 3110 (for 350B and 450B) Hydraulic Ripper PC931
  6. 10 RIPPERS, HYDRAULIC--3100 AND 3110
  7. HYDRAULICS FOR RADIAL RIPPER ON 450G AND 455G CRAWLER [B05]
HYDRAULICS FOR RADIAL RIPPER ON 450G AND 455G CRAWLER [B05]

Parts list:

 №  Number Qty Name Options
1   T78646   4  Adapter Fitting  
2   T77613   16  O-Ring  
3   R26906   2  O-Ring  
4   38H1172   2  Adapter Fitting (DOZERS) (CONTROL VALVE TO HOSE)  
4   38H1338   2  Adapter Fitting (LOADERS) (UPPER AND LOWER THIRD FUNCTION VALVE PORTS)  
5   38H1205   2  Tee Fitting  
6   AR21841   2  Clamp (HOSES-FROM ROD END CYLINDER TO TEE-CLAMP TO CYLINDER BARREL 170 MM (6.75IN) FROM LINE OF CENTER HEAD END PIN)  
7   AT104884   2  Hydraulic Hose 11/16" X 29-1/2" X 11/16", (ROD END LIFT CYLINDER TO TEE)  
8   AT104883   2  HYDRAULIC HOSE - FABRICATE 11/16" X 13-1/4" X 11/16", (HEAD END LIFT CYLINDER TO TEE)  
9   AT104885   2  Hydraulic Hose 11/16" X 57" X 11/16", (CONTROL VALVE TO TEES-HEAD END TO LOWER PORT-ROD END TO UPPER PORT)  
10   T121143   2  Orifice  
11   14M7274   2  Nut M10, (HOSE PRESSURE LINE CLAMP SCREWS)  
12   24M7239   2  Washer 10.700 X 21 X 2.500 MM  
13   U13055   4  CLAMP (TO HOSE CONNECTORS AT BOTH SIDES OF "T" UNION)  
14   28H1519   2  Washer 0.493" X 0.675" X 3/8", (TO TUBE CLAMP)  
15   19M7550   1  Cap Screw M10 X 35  
16   19M7938   2  Cap Screw M10 X 20, (HOSE PRESSURE LINE CLAMPS)  
17   AT125241   1  RIPPER (DOZER VERSION) (ALSO INCLUDES MAST AND FRAME SHOWN ON DIFFERENT PAGE)  
17   AT104897   1  RIPPER (LOADER VERSION) (ALSO INCLUDES MAST AND FRAME SHOWN ON DIFFERENT PAGE)  

Next page:

10-5
LIFT CYLINDER (JD350, JD450) (SERIAL NO. -59099) [A09]
LIFT CYLINDER (JD350, JD450) (SERIAL NO. -59099) [A09]
10-6
LIFT CYLINDER (JD350, JD450) (SERIAL NO. 59100- ) (RADIAL RIPPER 450G AND 455G) [A10]
LIFT CYLINDER (JD350, JD450) (SERIAL NO. 59100- ) (RADIAL RIPPER 450G AND 455G) [A10]
10-8
SIDE MOUNTING BRACKETS FOR 6300 AND 6305 BULLDOZER FOR 350C (3100 RIPPER) [A11]
SIDE MOUNTING BRACKETS FOR 6300 AND 6305 BULLDOZER FOR 350C (3100 RIPPER) [A11]
10-8
REAR MOUNTING BRACKETS FOR 350C (3100 RIPPER) [A11]
REAR MOUNTING BRACKETS FOR 350C (3100 RIPPER) [A11]
10-9
REAR MOUNTING BRACKETS FOR 3100 RIPPER [A12]
REAR MOUNTING BRACKETS FOR 3100 RIPPER [A12]
10-28
FRAME AND MAST (RADIAL RIPPER FOR 450G AND 455G CRAWLER) [B03]
FRAME AND MAST (RADIAL RIPPER FOR 450G AND 455G CRAWLER) [B03]
10-27
REPLACEMENT SELECTOR VALVE FOR USE WITH 4-IN-1 BUCKET (USE FLAT FACE O-RING SEALS) [B02]
REPLACEMENT SELECTOR VALVE FOR USE WITH 4-IN-1 BUCKET (USE FLAT FACE O-RING SEALS) [B02]
10-26
SELECTOR VALVE FOR USE WITH 4-IN-1 BUCKET [B01]
SELECTOR VALVE FOR USE WITH 4-IN-1 BUCKET [B01]
10-24
REPLACEMENT OIL LINES AND FITTINGS FOR 3110 RIPPER ON CRAWLER LOADERS WITH 4-IN-1 BUCKET (USE FLAT FACE O-RING SEALS) [A24]
REPLACEMENT OIL LINES AND FITTINGS FOR 3110 RIPPER ON CRAWLER LOADERS WITH 4-IN-1 BUCKET (USE FLAT FACE O-RING SEALS) [A24]
10-23
OIL LINES AND FITTINGS FOR 3100 OR 3110 RIPPERS ON CRAWLER LOADERS WITH 4-IN-1 BUCKET [A23]
OIL LINES AND FITTINGS FOR 3100 OR 3110 RIPPERS ON CRAWLER LOADERS WITH 4-IN-1 BUCKET [A23]