Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | 14M7276 | AR | Nut | M16 |
| 2 | 24H1373 | 1 | Washer | 21/32" X 1-9/16" X 0.180" |
| 3 | H94510 | 1 | Spring | |
| 4 | N118600 | 1 | Spacer | |
| 5 | H171659 | 1 | Gauge | |
| 6 | H129208 | 1 | Pivot | |
| 7 | 14M7299 | AR | Flange Nut | M12 |
| 8 | AH210916 | 1 | Pin | SUB FOR AH201407 |
| 9 | 19M7788 | 3 | Screw | M12 X 25 |
| 10 | H171061 | 2 | Bushing | |
| 11 | AA5607R | 2 | Seal | |
| 12 | P46402 | 2 | Snap Ring | |
| 13 | AH201433 | 1 | Idler | |
| 14 | H204589 | 1 | Eyebolt | |
| 15 | 14M7291 | 2 | Flange Nut | M16 |
| 16 | AH97031 | 1 | Idler | SUB FOR AH165366 |
| 17 | 19M7826 | 1 | Screw | M16 X 70 |
| 18 | H204591 | 1 | Bushing | |
| 19 | 24H1373 | 1 | Washer | 21/32" X 1-9/16" X 0.180" |
| 20 | H84374 | 1 | Bushing | 16.662 X 34.925 X 12.700 mm (21/32" X 1-3/8" X 1/2"), SUB FOR P50273 |
| 21 | AH201252 | 1 | Idler | |
| 22 | 11M7030 | 1 | Cotter Pin | 5 X 40 mm |
| 23 | HXE38943 | 1 | Pulley | 615, 618, 620, 625 and 630; SUB FOR AH201561 |
| 23 | AH209769 | 1 | Pulley | |
| 23 | HXE22628 | 1 | Pulley | 635; Deep Groove – “C�? Section; SUB FOR H221001 |
| 23 | AH216410 | 1 | Pulley | 246 mm, Slowdown Option |
| 23 | AH216411 | 1 | Pulley | 239 mm, Slowdown Option |
| 24 | 14M7252 | 1 | Nut | M20 |
| 25 | H202647 | 1 | V-Belt | LGTH = 3327.4 mm, WIDTH = 22.35 mm, SUB FOR H138762 OR H138761 |
| 25 | H221324 | 1 | V-Belt | LGTH = 3085 mm, WIDTH = 22.35 mm, Extended Cutterbar; SUB FOR H210001 |
| 25 | H210003 | 1 | V-Belt | LGTH = 2825 mm, WIDTH = 22.35 mm, Retract and Middle Cuttingbar |
| 26 | 14M7286 | AR | NUT | M16 |
| 27 | Z77577 | 1 | Bracket | |
| 28 | 03M7191 | AR | Bolt | M10 X 25 |
| 29 | 14M7291 | 1 | Flange Nut | M16 |
| 30 | H91305 | 1 | Handle | |
| 31 | H209636 | 1 | Channel | |
| 32 | 14M7286 | AR | NUT | M16 |
| 33 | 19M8043 | 4 | Cap Screw | M16 X 140 |
