ENGINE CLUTCH AND PRESSURE PLATE (HI-LO-REVERSE TRANSMISSION) [01F18] 35 TRANSMISSION, DIFFERENTIAL AND CLUTCH HOUSING 450 Crawler Tractor (with 3320 or 3325 Winch) PC922 in WINCH 3320

№	Number	Qty	Name	Options
1	R26933	1	SNAP RING
2	AL28037	1	BALL BEARING	(SUB FOR JD8511, THIS APPLICATION) (SUB FOR AL24903)
3	AT21500	1	DISK	(USE IF AVAILABLE) (SUB FOR AT18548)
3	AT141683	1	DISK	(SUB FOR AT21500)
4	AT17766	1	CLUTCH PLATE	(SUB AT25817, THIS APPLICATION)
5	12H303	6	Lock Washer	5/16"
6	L372T	6	CAP SCREW	5/16" X 7/8"
7	AM3983T	1	THRUST BEARING
8	AT32522	1	PLANET PINION CARRIER	(MARKED T33322) (SUB FOR AT18544) (MARKED T20836)
9	T20900	1	Hose
10	JD7781	1	Lubrication Fitting	1/8"
11	T21321	2	SET SCREW
12	T34846	1	FORK	(SUB FOR T23999)
13	M226T	1	Spring
14	T33883	1	SPRING	(SUB FOR T20837)
15	T23997	1	PIN FASTENER
16	[T20840]	1
17	AT18768	1	ADJUSTER
18	T21154	1	ANGLE
19	T21158	1	Yoke
20	11M7059	1	Cotter Pin	3.200 X 20 MM
21	R72855	1	Pin Fastener	(SUB FOR T10187)
22	T67054	1	LEVER	(SUB FOR T23996)
23	14H821	2	Nut	5/8"
24	[]	1		( T15941 NO LONGER AVAILABLE)
25	[]	1		( T19428 NO LONGER AVAILABLE)
26	[]	6		( T15943 NO LONGER AVAILABLE)
27	T15939	6	SPRING
28	[]	3		( T15944 NO LONGER AVAILABLE)
29	[]	3		( T15942 AND T19956 NO LONGER AVAILABLE)
30	T13267	3	CLIP
31	T18750	3	CAP SCREW
32	14H882	3	Nut	5/16"
33	T15940	3	WASHER	(USE IF AVAILABLE)
33	24H1657	1	Washer	21/64" X 1-1/4" X 7/64", (SUB FOR T15940)