RING GEAR ASSEMBLY [01G10] 35 TRANSMISSION, DIFFERENTIAL AND CLUTCH HOUSING 450 Crawler Tractor (with 3320 or 3325 Winch) PC922 in WINCH 3320

№	Number	Qty	Name	Options
1	T21147	2	EYEBOLT
2	T20777	2	BUSHING
3	AT18514	1	BEARING HOUSING W/O BEARING	(SUB ONE AT21579 QUILL ASSEMBLY AND TWO T24433 SPRINGS)
3	AT21579	2	BEARING HOUSING W/O BEARING	( T24449), WITH BEARING CUP, OIL SEAL, AND TUBE (NO LONGER AVAILABLE, ORDER AT12520, JD7425, T20777 AND T24449)
4	T37592	AR	Shim	0.05 MM (.002") (SUB FOR T17053)
4	T37594	AR	Shim	0.13 MM (.005") (SUB FOR T17052)
4	T37593	AR	Shim	0.25 MM (.010") (SUB FOR T17050)
5	T20779	2	Ring
6	AT12520	2	SEAL
7	JD7425	2	Bearing Cup
8	JD8103	2	Bearing Cone
9	17H91	10	RIVET	1/2" X 2"
9	16H1592	AR	RIVET	7/16" X 1-3/4"
10	12H304	12	Lock Washer	3/8"
11	19H3483	12	Cap Screw	3/8" X 1-1/8"
12	[]	1		(.446 HOLE SIZE) (IF HUB IS MARKED T18062 AT59731 MUST BE ORDERED T18062 IS NO LONGER AVAILABLE)
12	T41190	1	HUB	(SUB FOR T31827) (.522 HOLE SIZE)
13	AT59731	1	PINION SHAFT	SHAFT, PINION (8 TEETH) WITH RING GEAR (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB (MARKED T41190) WITH RIVETS AND T64254 NUT, (SUB FOR AT18553) (MARKED T20791, T20775, T18062 AND AT30888)