HYDRAULIC REVERSER FRONT CLUTCH ASSEMBLY [01F19] 35 TRANSMISSION, DIFFERENTIAL, CLUTCH HOUSING AND BELT PULLEY 350 Crawler Tractor PC921 in LOADER, CRAWLER 350

№	Number	Qty	Name	Options
1	T16011	1	PISTON	(A)
2	T15793	6	PLATE	(A)
3	T211802	6	CLUTCH PLATE	(A) (SUB FOR T15801)
4	T10591	3	SCREW	(A)
5	T126284	3	SHAFT KEY	(A) (SUB FOR T10584, THIS APPLICATION)
6	T34902	1	HUB	(A) (SUB FOR T15790)
7	T15509	1	Snap Ring
8	JD8188	1	Bearing Cone	(USE WITH T30049)
8	JD7354	1	BEARING CONE	(USE WHEN T37439 OR T37440 FORWARD CLUTCH SPIDER HAS BEEN INSTALLED)
9	JD8226	1	Bearing Cup	(USE WITH T30049)
9	JD7401	1	BEARING CUP	(USE WHEN T37439 OR T37440 FORWARD CLUTCH SPIDER HAS BEEN INSTALLED)
10	T19142	1	SPIDER	(SUB T37440, JD7354 AND JD7401)
10	T37440	1	SPIDER	(REPLACEMENT PART FOR T19142) 7/8" O.D.
10	T37439	1	SPIDER	(D) (ALSO ORDER JD7401 AND JD7354) (SUB FOR T30049) 5/8" O.D.
11	T15800	1	SNAP RING	(A)
12	T15794	1	BUSHING	(A)
13	T15799	2	PISTON RING	(A)
14	T42467	1	WASHER	(A) (USE WITH AT21209, AT33947 AND AT35375) (SUB FOR T23634)
15	T16010	1	PLANET PINION CARRIER	(A)
16	T16012	1	PIN	(A)
17	T34904	1	WASHER	(A) (USE WITH AT21209, AT33947 AND AT35375) (SUB FOR T23635)
18	12H293	8	Lock Washer	7/16"
19	19H2106	3	Cap Screw	7/16" X 2-3/4"
20	AT36238	1	COVER	FRONT, WITH IDLER SHAFT, AND DOWEL PINS (MARKED T37438) (ALSO ORDER JD8135 BEARING CONE AND JD7438 BEARING CUP) (SUB FOR AT17407, MARKED T19145)
21	19H1740	5	Cap Screw	7/16" X 1-3/4"
22	T13976	2	Bushing
23	JD8230	1	Bearing Cup
24	JD8194	1	Bearing Cone
25	T19151	1	GASKET	IF AVAILABLE
25	T84528	1	GASKET	(SUB FOR T19151)
..	AT37548	1	CLUTCH	INCLUDES ALL PART NUMBER IDENTIFIED BY (A) ON THIS PAGE AND PAGE 35-12, (SUB FOR AT21209, AT33947 AND AT35375)
..	AT27835	1	FLYWHEEL	TORSIONAL ISOLATOR