CRANKSHAFT AND IDLER GEARS [01B05] 10 ENGINE 350 Crawler Tractor PC921 in LOADER, CRAWLER 350

№	Number	Qty	Name	Options
1	R48685	1	Dowel Pin	(SUB FOR A120R)
2A	T20037	2	THRUST WASHER	(INNER THRUST)
2B	T26324	2	THRUST WASHER	(INNER THRUST)
3A	T20036	2	SHAFT
3B	R109863	1	Shaft	(SUB FOR T26323 AND R89824)
4	RE46896	1	CRANKSHAFT	(WITH BEARING AND OIL SEALS) (MARKED R100142) (SUB FOR AT18031,MARKED T23516) (DIESEL)
4	AT21072	1	CRANKSHAFT	(MARKED T23484) (GASOLINE)
5	AR91660	1	Gear	(MARKED R70182) (SUB FOR AT18009) (MARKED T20029) (55 TEETH)
6	T20034	1	Bushing
7A	T20038	2	THRUST WASHER	(OUTER THRUST)
7B	T26326	2	THRUST WASHER	(OUTER THRUST)
8	T20291	2	WEAR PLATE
9	T20290	2	SHIM
10A	19H1805	1	CAP SCREW	1/2" X 2-1/4"
10B	T26327	1	Screw
11	19H2993	1	Cap Screw	1/2" X 1-1/2"
12	T20217	1	Washer
13	T24441	1	PULLEY	(SUB FOR T23490)
14	AT21608	1	SEAL	(FRONT) (SUB FOR T20042) (SUB AR67942)
14	AR67942	1	Seal	(FRONT)
15	T20046	1	Oil Slinger
16	T20094	1	Helical Gear	(24 TEETH)
17	26H72	1	Shaft Key	1/8" X 5/8"
18	T23604	1	SHAFT KEY
19A	T26325	2	SCREW
19B	19H3183	1	CAP SCREW	HS, SAE 8, 1/2" X 1-1/8"
20	19H1930	1	Cap Screw	1/2" X 2-1/2"
21	T20034	1	Bushing
21	T26321	1	Bushing
22	AT18039	1	GEAR	(MARKED T20135) CRANKSHAFT LOWER IDLER, WITH BUSHING (45 TEETH)
22	AT24252	1	GEAR	(MARKED T26322) CRANKSHAFT, LOWER IDLER, WITH BUSHING (45 TEETH)
23	34H286	1	Spring Pin	3/16" X 1-1/2"
24	T20136	1	FITTING
25A	24H1890	1	Washer	19/32" X 1" X 1/4"
25B	R100105	1	Washer
26	T20326	1	SEAL	(REAR)
26	RE24959	1	SEAL	(USE IF AVAILABLE) REAR, WITH WEAR RING, (SUB FOR AT22965 AND AR92893)
26	RE44574	1	Seal	(SUB FOR RE24959)
27	34H283	1	Spring Pin	3/16" X 1-1/8"
28	T26323	1	SHAFT
28	R109863	1	Shaft	(SUB FOR R89824)
29	14H865	1	Nut	1/2"