Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | AH232575 | 1 | Cam Kit | CAMS (INCLUDES PARTS MARKED (A)),(SUB FOR AH201888 OR AH213114) |
| 2 | 32243 | 1 | Plug | |
| 3 | H170645 | 1 | Washer | |
| 4 | 19M7938 | 6 | Cap Screw | M10 X 20, (A) |
| 4 | 12M7135 | 6 | Lock Washer | 10 mm, (A) |
| 5 | 03M7198 | 2 | Bolt | M12 X 30 |
| 6 | 19M7826 | 2 | Screw | M16 X 70 |
| 7 | 14M7299 | 2 | Flange Nut | M12 |
| 8 | H148132 | 4 | Bushing | |
| 9 | H148133 | 4 | Retainer | |
| 10 | H163726 | 1 | Washer | |
| 11 | P50456 | 4 | Washer | |
| 12 | 19M7845 | 1 | Screw | M16 X 90 |
| 13 | Z64078 | 2 | Spacer | |
| 14 | R62502 | 1 | Support | |
| 15 | H97410 | 1 | Washer | |
| 16 | H95417 | 1 | Spacer | |
| 17 | JD9202 | 1 | Ball Bearing | |
| 18 | H178565 | 1 | Bracket | |
| 19 | H234410 | 1 | Shaft | (SUB FOR H202940) |
| 20 | 03M7193 | 3 | Bolt | M10 X 35 |
| 21 | 14M7296 | 3 | Flange Nut | M10 |
| 22 | 24M7241 | 4 | Washer | 17 X 34 X 4 mm |
| 23 | JD9201 | 1 | Eccentric Locking Collar | |
| 24 | H93927 | 1 | Housing | |
| 25 | AXE10874 | 1 | Drive Sprocket | (SUB FOR AH149349) |
| 26 | T55761 | 1 | Support | |
| 27 | H223849 | 1 | Ring | (SUB FOR T61327) |
| 28 | Z61818 | 2 | Shaft Key | |
| 29 | H155459 | 1 | Retainer | |
| 30 | 19M9042 | 3 | Cap Screw | M10 X 80, (A) |
| 30 | 12M7135 | 3 | Lock Washer | 10 mm, (A) |
| 31 | H201579 | 1 | Half Sheave | STANDARD CAPACITY |
| 31 | H216332 | 1 | Half Sheave | Not For 9560SH, HIGH CAPACITY,(SUB FOR H209070) |
| 32 | B3118R | 1 | Snap Ring | |
| 33 | AH96345 | 1 | Seal | (A) |
| 34 | H172267 | 1 | Compression Spring | |
| 35 | 34M7255 | 1 | Spring Pin | 6 X 50 mm, STANDARD CAPACITY |
| 35 | 34M7255 | 2 | Spring Pin | 6 X 50 mm, Not For 9560SH, HIGH CAPACITY |
| 36 | H203393 | 1 | V-Belt | LGTH = 4435 mm, WIDTH = 38.1 mm, Not For 9560SH, Standard Capacity |
| 36 | H218728 | 1 | V-Belt | LGTH = 4600 mm, WIDTH = 44.5 mm, Not For 9560SH, High Capacity SUB FOR H156863 |
| 36 | H161648 | 1 | V-Belt | LGTH = 4520 mm, WIDTH = 38.1 mm, For 9560SH, Standard Capacity |
| 37 | JD7798 | 2 | Lubrication Fitting | |
| 38 | AH201417 | 1 | Pulley | STANDARD CAPACITY |
| 38 | AH204587 | 1 | Half Sheave | Not For 9560SH, HIGH CAPACITY |
| 39 | H110728 | 1 | Round Retainer | (A) |
| 40 | H97308 | 1 | Snap Ring | (A) |
| 41 | AH108161 | 1 | Seal | (A) |
| 42 | 26H104 | 1 | Shaft Key | 5/16" X 2-1/8", (A) |
| 43 | H110922 | 1 | Ball | STANDARD CAPACITY |
| 44 | 22H775 | 2 | Set Screw | 5/16" X 1/4", STANDARD CAPACITY |
