Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | [] | 1 | (EDGE PROTECTOR) (RH), (SUB AT167874) | |
| 2 | [] | 1 | (LH), Edge Protector, (SUB AT167874) | |
| 3 | 307048 | 2 | Bar | (ORDER FROM CENTRAL FABRICATORS) (OUTER), Wear |
| 4 | 4143522 | 1 | Bushing | (SUB FOR TH103234) |
| 5 | 4179110 | 1 | Pin | (SUB FOR TH103520) |
| 6 | 4143524 | 6 | Washer | 1 MM, (SUB FOR TH103235) |
| 7 | 4143525 | 2 | Shim | (SUB FOR TH103236) |
| 8 | TH103237 | 1 | Plate | |
| 9 | 19H2706 | 3 | Cap Screw | 5/8" X 2" |
| 10 | 12H294 | 3 | Lock Washer | 5/8" |
| 11 | [] | 2 | ( TH103198 NLA) | |
| 13 | C606071 | 1 | Pivot | (ORDER FROM CENTRAL FABRICATORS) (BUCKET EAR BLANK ASSEMBLY) |
| 14 | 307047 | 2 | Plate | (ORDER FROM CENTRAL FABRICATORS) (RH/LH) |
| 15 | AT131090 | 1 | Dura-Max Cutting Edge | (CUT TO LENGTH) |
| 16 | 300483 | 1 | Vertical Cutter | (ORDER FROM CENTRAL FABRICATORS) (UPPER RH) |
| 17 | 300484 | 1 | Vertical Cutter | (ORDER FROM CENTRAL FABRICATORS) (UPPER LH) |
| 18 | 300482 | 1 | Vertical Cutter | (ORDER FROM CENTRAL FABRICATORS) (LH), Insert |
| 19 | 300481 | 1 | Vertical Cutter | (ORDER FROM CENTRAL FABRICATORS) (RH), Insert |
| 20 | 600292 | 1 | Moldboard | (ORDER FROM CENTRAL FABRICATORS) (48 INCH) |
| 20 | 600915 | 1 | Moldboard | (ORDER FROM CENTRAL FABRICATORS) (54 INCH) |
| 20 | 600916 | 1 | Moldboard | (ORDER FROM CENTRAL FABRICATORS) (60 INCH) |
| 21 | [] | 1 | (SUB <service-part qty="1">AT131080</service-part>)(LH) | |
| 22 | [] | 1 | (SUB <service-part qty="1">AT131080</service-part>)(RH) | |
| 23 | 09H1770 | 6 | Bolt | 7/8" X 2-1/2" |
| 24 | 12H245 | 6 | Lock Washer | 7/8" |
| 25 | 14H1077 | 6 | Nut | 7/8" |
| 27 | 300479 | 2 | Bar | (ORDER FROM CENTRAL FABRICATORS) (INNER), Wear |
| 28 | [] | 1 | (AVAILABLE TOOTH ASSEMBLIES ON SEPARATE PAGE) (54 INCH/2.30 CUBIC YARD) ( AT163660 NLA), Requires 7 Teeth | |
| 29 | [] | 1 | ( AT131080 NLA), Side Cutter Kit | |
| 30 | [] | 1 | ( AT167874 NLA), (EDGE PROTECTOR) | |
| 31 | 14H1044 | 6 | Nut | 7/8" |
