0 Non Sectionalized Catalog RG Series and 46 Row-Crop Cultivators PC717 in CULTIVATOR, ROW-CROP RG

MAIN FRAME (USED ON 46, RG2, RG4, RG6, RG430, RG630, RG820, RG830, AND RG1220) [A12]

RIG LIFT ARM AND ROD (USED ON 46, RG2, RG4, RG6, RG8, RG430, RG630, RG820, RG830, RG830F, RG1220, RG1230, AND RG1620) [A13]

MAIN FRAME (USED ON RG20) [A14]

MAIN FRAME (USED ON RG830F) [A15]

MAIN FRAME (USED ON RG40) [A16]

MAIN FRAME AND TRUSS RODS (RG8 CULTIVATOR) ( -1966) [A17]

MAIN FRAME AND TRUSS RODS (RG8, RG1230, AND RG1620) (1967- ) [A18]

MAST AND HITCH PINS (USED ON 46, RG2, RG4, AND RG6) ( -1966) [A19]

MAST AND HITCH PINS (USED ON RG430, RG630, RG830, AND RG830F) ( -1966) [A20]

MAST AND HITCH PINS (USED ON RG4, RG6, RG430, RG630, RG820, RG830, RG830F, AND RG1220) (1967- ) [A21]

CROSSHEADS AND CLAMPS [A22]

RIGS (RG8 CULTIVATOR) ( -1966) [A23]

RIGS (USED ON 46, RG2, RG4, RG6, RG8, RG430, RG630, RG830, RG830F, RG1230) [A24]

RIGS (RG820, RG1220, AND RG1620) [A25]

RIGS (USED ON RG20 AND RG40) [B01]

ROLLING COULTER WITH PLAIN BEARING (46 AND RG4) ( -1961) [B02]

ROLLING COULTERS WITH PLAIN BEARING (CENTER AND OUTER) (1962-1966) (USED ON 46, RG2, RG4, RG6, RG430, RG630, RG830, RG830F) [B03]

ROLLING COULTER WITH ANTI-FRICTION BEARING (OUTER AND CENTER) [B05]

ROLLING COULTER WITH ANTI-FRICTION BEARING [B07]

REGULAR SPRING-TRIP SHANKS [B09]

WEEDING KNIFE-SHANK [B10]

QUICK-ADJUSTABLE SPRING-TRIP SHANKS [B11]

FRICTION-TRIP SHANKS [B12]

SPRING-TOOTH SHANKS [B13]

ROTARY CULTIVATOR WHEEL AND SHANK [B14]

ROTARY CULTIVATOR SHIELD [B15]

HOODED SHIELD [B16]

ROLLING SHIELD [B17]

ROTARY CULTIVATOR BAR AND TOOL CLAMPS [B18]

SHIELD [B19]

DISK HILLERS WITH PLAIN BEARING, 12-INCH AND 14-INCH [B20]

SPREAD ARCH (USED ON 46, RG2, RG6, RG8, RG20, AND RG40) [B21]

DISK HILLERS WITH ANTI-FRICTION BEARING, 12-INCH, 14-INCH, AND 16-INCH [B22]

GUIDE ROD [B23]

ROTARY HOE ATTACHMENT (USED ON 46, RG4, RG6, RG8, RG430, RG630, RG830, RG830F, AND RG1230) [B24]

ROTARY HOE ATTACHMENT (USED ON RG20 AND RG40) [B25]

PLAIN BEARING RUBBER TIRE GAUGE WHEEL - CASTERING TYPE (USED ON 46, RG2, RG6, RG430, RG630, RG830, AND RG830F) [C01]

PLAIN BEARING RUBBER TIRE GAUGE WHEEL - RIGID TYPE (USED ON 46, RG2, RG4, RG6, RG430, RG630, RG830, AND RG830F) ( -1966) [C02]

ANTI-FRICTION BEARING RUBBER TIRE GAUGE WHEEL [C03]

SQUARE BAR AND TOOL CLAMPS (RG430 AND RG630) [C04]

FRONT TRANSPORT WHEEL ATTACHMENT (RG8, RG1230, AND RG1620) (1967- ) [C05]

REAR TRANSPORT WHEEL ATTACHMENT (RG8, RG1230, AND RG1620) (1967- ) (RG6) (1969- ) [C06]

FRONT TRANSPORT HITCH ATTACHMENT (RG6) (1969- ) [C07]

NO. 20 GAUGE WHEEL ATTACHMENT (RG8, RG1230, AND RG1620) (1968- ) [C08]

HOPPER SUPPORTS AND DIFFUSER (GRANULAR APPLICATOR ATTACHMENT) [C09]

GRANULAR HOPPER (GRANULAR APPLICATOR ATTACHMENT) [C10]

HYDRAULIC MOTOR BRACKET, DRIVE SHAFT AND SPROCKETS (GRANULAR APPLICATOR ATTACHMENT) [C11]

OIL LINES (GRANULAR APPLICATOR ATTACHMENT) [C12]

HYDRAULIC MOTOR (GRANULAR APPLICATOR ATTACHMENT) [C13]

SPRAY SHIELD SHANK AND MOUNTING BRACKETS [C14]

SPRAY SHIELD AND SUPPORTS [C15]

SPRAY SHIELD MANIFOLD, NOZZLES AND HOSES [C16]

SAFETY REFLECTORS, BRACKETS, AND TAPE [C17]