Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | L204703 | 1 | Spring Washer | |
| 2 | L174442 | 1 | Bearing Cup | |
| 3 | AL178946 | 1 | Bearing Cone | |
| 4 | L209419 | 1 | Gear | |
| 5 | L208843 | 1 | Synchronizer | |
| 6 | AL213992 | 2 | Synchronizer | |
| 7 | L220729 | 1 | Gear | SUB FOR L210212 |
| 8 | L212616 | 1 | Lock Washer | |
| 9 | L208844 | 3 | Synchronizer | |
| 10 | L212672 | 1 | Ring | TK = 2.1 mm (0.082”), ORDER L214191 |
| 10 | L214191 | 1 | Ring | TK = 2.1 mm (0.082") |
| 10 | L212673 | 1 | Ring | TK = 2.2 mm (0.086”), ORDER L214192 |
| 10 | L214192 | 1 | Ring | TK = 2.2 mm (0.086") |
| 10 | L212674 | 1 | Ring | TK = 2.3 mm (0.090”), ORDER L214193 |
| 10 | L214193 | 1 | Ring | TK = 2.3 mm (0.090") |
| 10 | L212675 | 1 | Ring | TK = 2.4 mm (0.0944”), ORDER L214194 |
| 10 | L214194 | 1 | Ring | TK = 2.38 mm (0.093") |
| 10 | L212676 | 1 | Ring | TK = 2.5 mm (0.098”), ORDER L214195 |
| 10 | L214195 | 1 | Ring | TK = 2.4 mm (0.094") |
| 10 | L212677 | 1 | Ring | TK = 2.6 mm (0.102”), ORDER L214196 |
| 10 | L214196 | 2 | Ring | TK = 2.5 mm (0.098") |
| 10 | L212679 | 1 | Ring | TK = 2.7 mm (0.106”), ORDER L214197 |
| 10 | L214197 | 1 | Ring | TK = 2.6 mm (0.102") |
| 10 | L212681 | 1 | Ring | TK = 2.8 mm (0.110”), ORDER L214198 |
| 10 | L214198 | 1 | Ring | TK = 2.70 mm (0.105") |
| 10 | L212682 | 1 | Ring | TK = 2.9 mm (0.114”), ORDER L214199 |
| 10 | L214199 | 1 | Ring | TK = 2.78 mm (0.109") |
| 11 | L211260 | 1 | Gear | |
| 12 | L211262 | 1 | Bushing | ORDER L213493 |
| 12 | L213493 | 1 | Bushing | |
| 13 | 44M7171 | 2 | Dowel Pin | |
| 14 | AL217042 | 1 | Countershaft | ORDER AL221032; SUB FOR L212433 |
| 14 | AL221032 | 1 | Countershaft | |
| 15 | L211261 | 1 | Gear | |
| 16 | L218295 | 1 | Gear | SUB FOR L209422 |
| 17 | L210546 | 1 | Hub | |
| 18 | L174122 | 2 | Ring | |
| 19 | L210000 | 1 | Ring | |
| 20 | L209148 | 1 | Retainer | |
| 21 | AL208241 | 5 | Clutch Disk | (If Part is Replaced, Control Unit for Range Shifting must be Reprogrammed Before Starting the Transmission Calibration.) |
| 22 | L174444 | 3 | Clutch Plate | (If Part is Replaced, Control Unit for Range Shifting must be Reprogrammed Before Starting the Transmission Calibration.) |
| 23 | L208383 | 2 | Clutch Plate | (If Part is Replaced, Control Unit for Range Shifting must be Reprogrammed Before Starting the Transmission Calibration.) |
| 24 | L175094 | 3 | Ring | |
| 25 | L207814 | 1 | Drum | |
| 26 | AL209771 | 1 | Piston | |
| 27 | L207670 | 1 | Spring | |
| 28 | L208988 | 1 | Retainer | |
| 29 | 40M7262 | 1 | Snap Ring | |
| 30 | L78785 | 1 | Snap Ring | |
| 31 | 24M7335 | 1 | Washer | 45 X 55 X 3 mm |
| 32 | AL208374 | 1 | Ball Bearing | ORDER AL221169 |
| 32 | AL221169 | 1 | Ball Bearing | ALSO ORDER L217990 |
| 33 | L208106 | 1 | Needle Bearing | |
| 34 | L208385 | 2 | Washer | |
| 35 | 40M7071 | 2 | Snap Ring | |
| 36 | 40M1872 | 1 | Snap Ring | ORDER L217990 |
| 36 | L217990 | 1 | Snap Ring | |
| 37 | L212145 | 1 | Washer | |
| 38 | L174451 | 1 | Bearing Cup | |
| 39 | AL178951 | 1 | Bearing Cone |
