CRANKSHAFT, IDLER GEARS AND MIAN BEARINGS [01E04] CRANKSHAFT AND MAIN BEARINGS 0401 415B, 515B Backhoe Loaders PC3180 in BACKHOE, LOADER 515B

№	Number	Qty	Name	Options
1	RE24959	1	SEAL	(USE IF AVAILABLE) (SUB FOR AR92893)
1	RE44574	1	Seal	(SUB FOR RE24959)
2	T26565	1	Dowel Pin
3	26H72	1	Shaft Key	1/8" X 5/8"
4	T20094	1	Helical Gear	(24 TEETH)
5	[]	1		RE33197,MARKED R121018 NO LONGER AVAILABLE (SUB FOR AT18030,MARKED T23519 OR T23480, AND RE57664,MARKED R81959)SUB RE48748 CRANKSHAFT KIT
6	T26324	2	THRUST WASHER
7	R89824	1	Shaft	(SUB FOR T26323)
8	34H283	1	Spring Pin	3/16" X 1-1/8"
9	T20034	1	Bushing
10	AR91660	1	Gear	(55 TEETH) (MARKED R70182)
11	T26326	2	THRUST WASHER
12	T26327	1	Screw
13	T20046	1	Oil Slinger
14	AR67942	1	Seal
15A	T26325	2	SCREW
15B	19H3183	1	CAP SCREW	HS, SAE 8, 1/2" X 2-1/8"
16A	R76126	2	Washer
16B	R100105	1	Washer
17	T26321	1	Bushing
18	AT24252	1	GEAR	(45 TEETH) (MARKED T26322)
19	34H286	1	Spring Pin	3/16" X 1-1/2"
20	AT21140	4	Bearing	STANDARD (TWO T23214)
20	[]	4		( AT21108 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE (TWO T23552)
20	AT21110	4	BEARING	0.25 MM (.010") UNDERSIZE (TWO T23554)
20	AT21112	4	BEARING	0.51 MM (.020") UNDERSIZE (TWO T23556)
20	AT21114	4	BEARING	0.76 MM (.030") UNDERSIZE (TWO T23558)
21	AT21139	1	BEARING	STANDARD (TWO T23215)
21	[]	1		( AT21130 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE (TWO T23574)
21	AT21132	1	BEARING	0.25 MM (.010") UNDERSIZE (TWO T23576)
21	AT21134	1	BEARING	0.51 MM (.020") UNDERSIZE (TWO T23578)
21	AT21136	1	BEARING	0.76 MM (.030") UNDERSIZE (TWO T23580)
22	T26323	1	SHAFT
22	R89824	1	Shaft
23	14H865	1	Nut	1/2"