CRANKSHAFT/TIMING GEARS/MAIN BEARINGS [A18] 10 ENGINE Engine DZ05,DZ01 for Combines, 930, 940 PC3118 in ENGINE, COMBINE 930

№	Number	Qty	Name	Options
1	AT18030	1	CRANKSHAFT	ASSY, INCL KEYS 2,3,4
2	T26565	1	Dowel Pin
3	T20094	1	Helical Gear	Z = 24
4	26H72	1	Shaft Key	1/8" X 5/8"
5	T23604	1	SHAFT KEY
6	T24440	1	PULLEY
7	AR67942	1	Seal	FRONT (SUB FOR AT21608)
8	T20046	1	Oil Slinger
9	R55872	1	PULLEY	(SUB FOR R54098)
10	T20183	1	CAP SCREW
11	AR91660	1	Gear	UP, Z = 55, INCL KEY 12 (SUB FOR AT18009)
12	T20034	1	Bushing
13	AT24252	1	GEAR	LOW, Z = 45, INCL KEY 14
14	T26321	1	Bushing
15	T26323	2	SHAFT
16	34H283	1	Spring Pin	3/16" X 1-1/8"
17	34H286	1	Spring Pin	3/16" X 1-1/2"
18	T26327	1	Screw
19	T26325	2	SCREW
20	T26326	2	THRUST WASHER
21	T26324	2	THRUST WASHER
22	R76126	2	Washer	(SUB FOR R42364, 24H1890)
23	AT21140	4	Bearing	ID = STANDARD
23	AT21108	AR	BEARING	ID = -0,050 MM (.002")
23	AT21110	AR	BEARING	ID = -0,254 MM (.010")
23	AT21112	AR	BEARING	ID = -0,508 MM (.020")
23	AT21114	AR	BEARING	ID = -0,762 MM (.030")
24	AT21139	1	BEARING	REAR, ID = STANDARD
24	AT21130	AR	BEARING	ID = -0,050 MM (.002")
24	AT21132	AR	BEARING	ID = -0,254 MM (.010")
24	AT21134	AR	BEARING	ID = -0,508 MM (.020")
24	AT21136	AR	BEARING	ID = -0,762 MM (.030")