Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | H33629 | 8 | Mat | |
| 2 | M46717 | 2 | Plug | AIR CONDITIONING HOLES |
| 3 | R20513 | 1 | PLUG | FRONT WHEEL DRIVE HOLE |
| 4 | T11234 | 4 | Lock Nut | |
| 5 | 24M7296 | 12 | Washer | 10.500 X 30 X 2.500 mm |
| 6 | U42208 | 4 | Isolator | |
| 7 | T187977 | 1 | Bracket | |
| 8 | 19H3353 | 2 | Cap Screw | 5/8" X 5", (SUB FOR <service-part qty="1">19H3170</service-part>)(FRONT- HEAD UP) |
| 8 | 19H2619 | 2 | Cap Screw | 5/8" X 4", (REAR- HEAD DOWN) |
| 9 | 24H1367 | 2 | Washer | 21/32" X 1-1/4" X 1/4", (SUB FOR 24H1698, THIS APPLICATION) |
| 10 | 24H1852 | 4 | Washer | 21/32" X 2-3/4" X 0.180" |
| 10 | T179952 | 4 | Washer | |
| 11 | AT170854 | 4 | Isolator | |
| 12 | 14H1039 | 2 | Nut | 5/8", (FRONT SCREWS) |
| 12 | 14H760 | 2 | Nut | 5/8" |
| 13 | T155164 | 4 | Bushing | On Limit Bolts |
| 14 | A11667 | 4 | Washer | On Limit Bolts |
| 15 | 19H3255 | 4 | Cap Screw | 7/8" X 4", On Limit Bolts |
| 16 | T206106 | 2 | Label | (SUB FOR <service-part qty="1">R36590</service-part>)(AIR CONDITIONER CONDENSATE DRAIN LINE HOLES) |
| 16 | T206106 | 2 | Label | (SUB FOR <service-part qty="1">R36590</service-part>)(FRONT WIPER HARNESS HOLES) |
| 17 | H34597 | 2 | Plug | (1 - AUXILIARY WIRING HARNESS OPENING, 1 - MANUAL SHUT OFF CABLE OPENING) |
| 17 | T186793 | 2 | Label | (SUB FOR <service-part qty="1">H34597</service-part>, THIS APPLICATION)(1 - FRONT WIPER MOUNTING OPENING, 1 - LOWER FRONT WIPER WASHER HOSE OPENING) |
| 18 | 19H2633 | 4 | Cap Screw | 3/8" X 1-1/2" |
| 19 | 24H1682 | 10 | Washer | 13/32" X 7/8" X 0.120" |
| 20 | 24H1852 | 4 | Washer | 21/32" X 2-3/4" X 0.180" |
| 20 | T179952 | 4 | Washer | (SUB FOR T160825) |
| 21 | R28193 | 2 | Grommet | |
| 22 | 14H785 | 2 | Nut | 5/16" |
| 23 | T107324 | 2 | Hook Bolt | (STEERING HOSE SUPPORT) |
| 24 | 19H3065 | 4 | Cap Screw | 3/8" X 2" |
| 25 | T187837 | 1 | Angle | Platform To Cab Front |
| 26 | M3470T | 2 | Plug | |
| 27 | [] | 1 | Special Order Thru Dw | |
| 28 | H23746 | AR | PLUG | AIR CONDITIONING HOLES IN CAB FLOOR |
| 29 | T11234 | 4 | Lock Nut | |
| 30 | 24H1887 | 6 | Washer | 11/32" X 1" X 0.134" |
| 31 | 19H1900 | 6 | Cap Screw | 5/16" X 3/4" |
| 33 | T186793 | 3 | Label | (HEATER HOLES IN FLOOR) |
| 34 | T186793 | 1 | Label | (SUB FOR <service-part qty="1">19H3584</service-part>)(CAB FLOOR AIR HEATER SENSOR HOLE) |
| 35 | 24H1698 | 2 | Washer | 21/32" X 1-5/8" X 1/4" |
