Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | AMT2866 | 1 | Mower Reel | 18", (11-BLADE) |
| 1 | AMT2867 | 1 | Mower Reel | 22", ORDER AMT2886; SUB FOR AMT536; 9-BLADE |
| 1 | AMT2886 | 1 | Mower Reel | 22", SUB FOR AMT537; 11-Blade |
| 2 | ET11053 | 1 | Compression Spring | |
| 3 | 49M7049 | 1 | Shaft Key | 5 X 5 X 22 mm |
| 4 | 14M7306 | 1 | Nut | M20 |
| 5 | 24H1181 | 2 | Washer | 13/16" X 1-1/8" X 0.060" |
| 6 | ET17612 | 1 | Chain Sprocket | Z=11, USE WITH ET17613 |
| 6 | ET11058 | 1 | Drive Sprocket | Z=12, USE WITH ET11137 |
| 7 | 40M7080 | 1 | Snap Ring | |
| 8 | P44946 | 2 | Bushing | |
| 9 | AMT1108 | 2 | Bearing Cone | LH |
| 10 | MT2108 | 2 | Bearing Cup | |
| 11 | 19M7163 | 6 | Cap Screw | M8 X 25 |
| 12 | MT1160 | 2 | Seal | |
| 13 | MT4846 | 1 | Stationary Knife | 18 inch, Height of Cut = 2.5 mm, Tournament ORDER UC18877, SUB FOR MT4906 OR MT5034 |
| 13 | UC28164 | 1 | Stationary Knife | Low Cut SUB FOR UC19156, SUB FOR MT7350 AND MT6944 |
| 13 | UC18873 | 1 | Stationary Knife | Height of Cut = 3.2 mm, STD SUB FOR ET17533 |
| 13 | UC18869 | 1 | Stationary Knife | 22 inch, Height of Cut = 2.5 mm, Tournament SUB FOR ET17534 |
| 13 | ET11066 | 1 | Stationary Knife | Height of Cut = 3.2 mm, Spl. Inserted; STD |
| 13 | UC28163 | 1 | Stationary Knife | Height of Cut = 2 mm, Low Cut SUB FOR UC19154 OR MT7351 OR MT4869 |
| 13 | UC18877 | 1 | Stationary Knife | |
| 14 | 21M7194 | 13 | Screw | M6 X 12 |
| 14 | 21M7194 | 11 | Screw | M6 X 12 |
| 15 | MT7314 | 1 | Shoe | SUB FOR MT2364 OR MT2665 |
| 15 | MT4841 | 1 | Shoe | |
| 16 | ET11371 | 2 | Screw | |
| 17 | JD7844 | 2 | Lubrication Fitting | |
| 18 | ET11068 | 1 | Handle | Short, RH |
| 19 | ET11069 | 1 | Handle | Long, LH |
| 20 | ET11372 | 2 | Bolt | Bedknife Shoe |
| 21 | ET11070 | 2 | Compression Spring | |
| 22 | ET11071 | 2 | Clamp | |
| 23 | 19M7768 | 2 | Screw | M6 X 16 |
| 24 | AMT5163 | 1 | Housing | LH; SUB FOR AMT5105 |
| 25 | 24M7139 | 2 | Washer | 6.400 X 18 X 1.600 mm |
| 26 | 19M7931 | 2 | Screw | M8 X 16, (HS=10.9) |
| 27 | ET11072 | 2 | Angle | |
| 28 | 19M7768 | 2 | Screw | M6 X 16 |
| 29 | ET11073 | 1 | Seal | |
| 30 | ET11368 | 1 | Spacer | |
| 31 | ET11464 | 1 | Spacer | RH |
| 32 | M44162 | 1 | O-Ring | |
| 33 | MT7237 | 1 | Cap | RH; SUB FOR ET11462 |
| 34 | ET11367 | 1 | Cap Screw | |
| 35 | 14M7019 | 3 | Wing Nut | M6 |
| 36 | 21M5631 | 3 | Screw | M6 X 45 |
| 37 | AMT2978 | 1 | Guide Bar | SUB FOR AMT1094; Gage |
| 37 | BM18968 | 1 | Kit | Service |
| 38 | JD7844 | 2 | Lubrication Fitting | |
| 39 | AMT5162 | 1 | Housing | RH; SUB FOR AMT5104 |
| .. | TY6374 | AR | Sharpening Compound | 120 GRIT 4.5 KG (10 LBS.), Backlapping |
| .. | TY6375 | AR | Sharpening Compound | 120 GRIT, 11.3 KG (25 LBS.), Backlapping |
