AUGERS [A08] 0 Non Sectionalized Catalog 1600A Mower Conditioner PC2411 in MOWER, CONDITIONER 1600A

№	Number	Qty	Name	Options
1	E54809	26	Lock Nut	(SUB FOR E62934)
2	E74826	8	Pressed Flanged Housing
3	AE40895	4	Ball Bearing
4	AE55075	1	AUGER	UPPER (3.7M) (12 FT) (SUB FOR AE50515)
4	AE55077	1	AUGER	(SUB FOR AE50517) UPPER (4.3M) (14 FT)
4	AE55079	1	AUGER	(SUB FOR AE50519) UPPER (5.0M)(16 FT)
5	AE55076	1	AUGER	LOWER (3.7M) (12 FT) (SUB FOR AE50514)
5	AE55078	1	AUGER	(SUB FOR AE50516) LOWER (4.3M) (14 FT)
5	AE55080	1	AUGER	(SUB FOR AE50518) LOWER (5.0M)(16 FT)
6	03H1659	16	Bolt	1/2" X 1"
7	E87912	1	Shaft	SHAFTS ARE NOT REPLACEABLE ON AUGERS WHERE HEX SHAFT GOES THROUGH THE END PLATE. THE SHAFTS THAT ARE REPLACEABLE HAVE A 3"DIA. SHOULDER WHERE SHAFT IS WELDED TO END PLATE.
8	24H1572	16	Washer	1-13/16" X 2-3/8" X 0.060", (SUB E89842)
8	E89842	16	Spacer
9	E79053	1	PLATE
10	AE49643	1	CHAIN SPROCKET	19 TOOTH, RC50 LONG HUB TO OUTSIDE
11	E51414	2	WASHER
12	E52877	2	BOLT
12	19M7794	2	Screw	M16 X 50
13	AE56241	1	SUPPORT	UPPER AUGER, (SUB FOR AE48562)
14	AE49644	1	CHAIN SPROCKET	17 TOOTH, RC50, LONG HUB TO OUTSIDE
15	19H2898	1	Cap Screw	1/2" X 1-1/4"
16	N10213	8	Lock Nut
17	E86771	4	PANEL	LOWER AUGER
18	03H1540	8	Bolt	5/16" X 3/4"
19	AE53225	1	AUGER	LOWER AUGER PADDLE
20	E88490	1	Spindle	SHAFTS ARE NOT REPLACEABLE ON AUGERS WHERE HEX SHAFT GOES THROUGH THE END PLATE. THE SHAFTS THAT ARE REPLACEABLE HAVE A 3"DIA. SHOULDER WHERE SHAFT IS WELDED TO END PLATE.