DEPOT CORE RETURN ADDRESSES DEPOTS SHOULD RETURN CORES TO THE ADDRESSES LISTED BELOW. SHIPA CODES SHOWN NEXT TO SUPPLIER ARE CORE RETURN ADDRESS CODES. SHIPA CODES ARE PROVIDED ON FOLLOWING PAGES FOR EACH REMAN COMPONENT. THE ATTENTION LINE ON THE AD 105 CORE ACCEPTANCE CRITERIA AND RETURN PROCEDURES JDM Remanufactured Components and Core Identification Guide for Construction and Forestry Machines PC2345 in COMPONENT, REMANUFACTURED JDM

DEPOT CORE RETURN ADDRESSES - CONTINUED OTHER SHIPA CODES/ADDRESSES - INFORMATION ONLY - NO CREDIT TO DEALERS SHIPA CODE INFORMATION/ADDRESS NC003 DO NOT ISSUE CREDIT TO DEALERS PHOENIX PISTONS/DEERE REMAN CENTER 18050-0R STREET NISKU [02I22]

U.S. DEALER RETURN OF CUSTOMER'S EXCAVATOR MICROPROSSOR CORE FOR REMANUFACTURING RETURN THE AT152029 OR THE AT168663 EXCAVATOR MICROPROCESSOR CORE TO RIVERSIDE ELECTRONICS, LTD. AT THE FOLLOWING ADDRESS: SHIPPING ADDRESS: [02I20]

U.S. DEALER RETURN OF CUSTOMER'S STARTER CORE FOR REMANUFACTURING THE FOLLOWING STARTERS ARE RETURNED TO THE SUPPLIER FOR REMANUFACTURING. (THE "SUB TO" OR THE "SUB FOR" PART NUMBERS ARE LISTED IN PARENTHESES.) TY1430 (TY6630) TY1466 (TY6640) [02I20]

U.S. DEALER RETURN OF CUSTOMER'S IGNITION DISTRIBUTOR CORES FOR REMANUFACTURING. THE TY15857 SIX-CYLINDER IGNITION DISTRIBUTOR CORE AND THE TY24348 FOUR-CYLINDER IGNITION DISTRIBUTOR CORE ARE TO BE RETURNED TO THE FOLLOWING SUPPLIER FOR REMANUFACTURI

DEALER RETURN TO SUPPLIER AND REMANUFACTURE PROGRAM THE COMPONENTS IN THE RETURN AND REMANUFACTURE PROGRAM ARE NOT IN DEPOT PARTS STOCK. U.S. DEALERS MUST RETURN "R AND R" COMPONENT CORES DIRECTLY TO THE SUPPLIER FOR REMANUFACTURING AND RETURN TO YOU

DEALER CORE RETURN PROCEDURES NOTE: CORES FOR "RETURN AND REBUILD" ASSEMBLIES CANNOT BE RETURNED FOR CREDIT ONLY. THE ASSEMBLIES IN THIS CATEGORY CAN ONLY BE REMANUFACTURED AND RETURNED TO DEALERS AT A FIXED PRICE. 1. VERIFY THAT THE FAILED ASSEMBLY