EATON OR SAUER-DANFOSS HYDROSTATIC PUMPS, MOTORS, AND TRANSMISSIONS THE ASSEMBLY MUST MEET THE GENERAL CRITERIA SUCH AS COMPLETE, INTACT AND SHOW NO EVIDENCE OF IMPROPER STORAGE. THE ASSEMBLY MUST HAVE JOHN DEERE ID, SUCH AS A METAL TAG OF DECAL WITH 105 CORE ACCEPTANCE CRITERIA AND RETURN PROCEDURES JDM Remanufactured Components and Core Identification Guide for Agricultural Machines PC2344 in COMPONENT, REMANUFACTURED COMPONENT

CRITERIA FOR OTHER REMANUFACTURERS USE THE GENERAL CORE ACCEPTANCE CRITERIA ON PAGE 105-1 AT THE BEGINNING OF THIS SECTION FOR THE REMANUFACTURERS NOT MENTIONED ABOVE. [02G21]

DEALER CORE RETURN PROCEDURES NOTE: CORES FOR "RETURN AND REBUILD" ASSEMBLIES CANNOT BE RETURNED FOR CREDIT ONLY. THE ASSEMBLIES IN THIS CATEGORY CAN ONLY BE REMANUFACTURED AND RETURNED TO DEALERS AT A FIXED PRICE. 1. VERIFY THAT THE FAILED ASSEMBLY

U.S. DEALER RETURN OF RE55333, RE55334, RE68340, RE151986 OR RE153022 POWER SHIFT TRANSMISSION CORES FOR REMANUFACTURING RETURN TRANSMISSION CORE USING THE REMANUFACTURED TRANSMISSION SHIPPING STAND. THE POWER SHIFT TRANSMISSION CORE IS TO BE SHIPPED

U.S. DEALER RETURN OF RE54842 RANGE SELECTOR VALVE FOR REMANUFACTURING THE RE54842 RANGE SELECTOR VALVE CORE IS TO BE RETURNED TO THE DEPOT FOR REMANUFACTURING. TO RECEIVE CORE CREDIT, SUBMIT A COMPLETED PD5C, A COPY OF THE DC758 FORM AND A COPY OF T

DEALER RETURN TO SUPPLIER AND REMANUFACTURE PROGRAM THE COMPONENTS IN THE RETURN AND REMANUFACTURE PROGRAM ARE NOT IN DEPOT PARTS STOCK. U.S. DEALERS MUST RETURN "R AND R" COMPONENT CORES DIRECTLY TO THE SUPPLIER FOR REMANUFACTURING AND RETURN TO YOU

ALMA PRODUCTS CORE CRITERIA - CONTINUED THE SUPER HEAT SWITCH (A) IN REAR HOUSING HAS BOTH A PRESSURE SWITCH AND A TEMPERATURE BULB AND IS THE LEFT-HAND SWITCH IN THE ILLUSTRATION. IF THE SWITCH IN THE COMPRESSOR APPEARS LIKE THE RIGHT-HAND SWITCHES,

ALMA PRODUCTS AC COMPRESSORS NOTE: OIL THAT LEAKS FROM THE SKIP AREA OF WELD AT THE FRONT FLANGE AND MAIN HOUSING IS USUALLY OIL USED IN COMPRESSOR ASSEMBLY. USE A LEAK DETECTOR TO VERIFY FREON LEAKAGE. FULL CREDIT IS GIVEN FOR UNITS WHICH HAVE A [02

CORE ACCEPTANCE CRITERIA IF THE RETURNED CORE HAS ONE OR MORE OF THE FOLLOWING CONDITIONS, ZERO CORE CREDIT WILL APPLY. CORES WITHOUT ANY OF THE FOLLOWING CONDITIONS WILL RECEIVE 100 PERCENT CORE CREDIT. 1. THE ASSEMBLY MUST BE COMPLETE AND INTACT. [

CORE IDENTIFICATION, COMPONENT WHERE USED AND RETURN PROCEDURES TO IDENTIFY A REMANUFACTURED COMPONENT PART NUMBER, LOOK AT THE COMPONENTS LISTED IN THE SECTION FOR THE COMPONENT. A LISTING OF MACHINES THAT USE THE COMPONENT FOLLOWS THE COMPONENT [02