Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | N167650 | AR | Screw | 7.925 X 19.050 mm (5/16" X 3/4") |
| 2 | N10213 | AR | Lock Nut | 7.925 mm (5/16") |
| 3 | M66125 | 2 | Pressed Flanged Housing | |
| 4 | JD8554 | 1 | Eccentric Locking Collar | (FOR PRODUCTION, THIS IS ONE PART; TWO PARTS USED IN SERVICE.) |
| 5 | JD8665 | 1 | Ball Bearing | (FOR PRODUCTION, THIS IS ONE PART; TWO PARTS USED IN SERVICE.) |
| 6 | N219568 | 1 | Angle | LH |
| 7 | AA49570 | 1 | Link Chain | (UPPER) (97 LINKS, TYPE 40) (MAKE FROM AL390N, AL391N AND (2) AL392N) |
| 8 | 34H316 | 2 | Spring Pin | 1/4" X 1-1/2" |
| 9 | AN213173 | 1 | Chain Sprocket | 34 TEETH |
| 10 | N218989 | 1 | Drive Shaft | (30 FOOT) (8' 2"), LH |
| 10 | N280282 | 1 | Drive Shaft | (25 FOOT) (35 FOOT) (10' 9"), LH (SUB FOR N219024) |
| 10 | N219028 | 1 | Pin | (1' 9"), RH |
| 10 | N218987 | 1 | Drive Shaft | (30 FOOT) (35 FOOT) (7' 1"), CENTER |
| 11 | AA49571 | 1 | Link Chain | (LOWER) (77 LINKS, TYPE 2040) (MAKE FROM AP19999, AP19998 AP19994, AP19993 AND AP19995) |
| 12 | AN213172 | 1 | Chain Sprocket | LH AND RH (40 TEETH) (USE WITH 78 LINK CHAIN) |
| 12 | AN281229 | 1 | Chain Sprocket | 36 TEETH (USE WITH 77 LINK CHAIN) |
| 13 | E62934 | 1 | Flange Nut | 12.700 mm (1/2") |
| 14 | M60966 | 1 | Idler | |
| 15 | 24H1226 | 1 | Washer | 1/2" X 1-1/4" X 0.083" |
| 16 | 19H1945 | 1 | Cap Screw | 1/2" X 3-1/4" |
| 17 | N218982 | 1 | Angle | (25 FOOT) (35 FOOT) |
| 18 | N10213 | 2 | Lock Nut | (25 FOOT) 7.925 mm (5/16") |
| 19 | 34H331 | 1 | Spring Pin | (30 FOOT) 5/16" X 1-1/2", CENTER |
| 20 | N219571 | 1 | Clutch | (30 FOOT) (SUB N284030) |
| 20 | N284030 | 1 | Clutch | |
| 21 | N167331 | 1 | Tightener | |
| 22 | 19H1906 | 2 | Cap Screw | (25 FOOT) 5/16" X 1-1/2" |
