0 Non Sectionalized Catalog 1060 Seeding Tool PC2273 in TOOL, SEEDING 1060

ROCKSHAFT [A11]

MAIN FRAME HYDRAULIC CYLINDER ANCHOR [A12]

FRONT HINGE SUPPORT BEAM [A13]

HINGES [A14]

1.8 M (6') WING FOR 7.5 M (24'6") MACHINES [A15]

3.2 M (10'5") WING FOR 10 M (32'8") AND 12.5 M (41') MACHINES [A16]

WING SUPPORT [A17]

914 MM (36") EXTENSION [A18]

FRONT CENTER TUBE [A19]

WING CYLINDER ANCHOR AND WHEEL SUPPORT FOR 7.5 M (24'6") AND 10 M (32'8") MACHINES [A20]

CASTER WHEEL FRAME FOR 10 M (32'8") AND 12.5 M (41') MACHINES [A22]

CASTER WHEEL FOR 10 M (32'8") AND 12.5 M (41") MACHINES [A23]

WING CYLINDER ANCHOR AND WHEEL SUPPORT FOR 12.5 M (41') MACHINES [A24]

WALKING BEAM [A25]

WHEEL AND HUB [B01]

TRANSPORT LOCKUP [B02]

DEPTH STOPS [B03]

STUB BARS [B04]

WING LIFT LINKAGE FOR 7.5 M (24'6") AND 10 M (32'8") MACHINES [B05]

MAIN FRAME WING LIFT PARTS FOR 12.5 M (41') MACHINE [B07]

WING TRUSS RODS FOR 12.5 M (41') MACHINE [B08]

WING LIFT STOP [B09]

SLOW MOVING VEHICLE EMBLEM AND POST [B11]

WING SECONDARY LATCH [B12]

SPRING TRIP STANDARD [B13]

SWEEP EXTENDER [B14]

SHOVELS AND WHEATLAND SWEEPS (C-SHANK) [B15]

SWEEPS (TRU-WIDTH) [B15]

HARROW DRAWBAR AND MOUNTING PLATE [B16]

TINE BARS AND TINES [B17]

OPENER ROCKSHAFT, BEARINGS AND CRANK [B18]

CENTER FRAME OPENER DRAWBAR [B19]

WING OPENER DRAWBAR [B20]

DOUBLE-DISK OPENER, DRAWBAR AND SCRAPER (ALUMINUM BOOT) [B21]

DOUBLE-DISK OPENER, DRAWBAR AND SCRAPER (CAST IRON BOOT) [B23]

GANG PRESS PIVOT AND WHEEL [C01]

WING FOLD HYDRAULIC HOSES AND FITTINGS FOR 7.5 M (24'6") AND 10 M (32'8") MACHINES [C03]

WING FOLD HYDRAULIC HOSES AND FITTINGS FOR 12.5 M (41') MACHINE [C05]

DEPTH CONTROL HYDRAULIC HOSES AND FITTINGS [C07]

MARKER HYDRAULIC HOSES AND FITTINGS, L.H. [C09]

HITCH [A07]

MARKER HYDRAULIC HOSES AND FITTINGS, R.H. AND L.H. [C11]

MARKER SEQUENCE VALVE [C13]

SELECTOR CONTROL VALVE [C15]

3" X 8" HYDRAULIC CYLINDER (JOHN DEERE) [C16]

4" X 8" REPHASING HYDRAULIC CYLINDER (CESSNA "WYR-LOC") (SERIAL NO. -810) [C17]

4" X 8" HYDRAULIC CYLINDER (EATON REPHASING) (SERIAL NO. 811- ) [C18]

4-1/4" X 8" HYDRAULIC CYLINDER (CESSNA "WYR-LOC") (SERIAL NO. -810) [C19]

4-1/4" X 8" HYDRAULIC CYLINDER (EATON - REPHASING WITH STROKE CONTROL) (WYR-LOC) (580 SERIES CYLINDER) (SERIAL NO. 811- ) [C20]

4" X 32" HYDRAULIC CYLINDER (JOHN DEERE) [C21]

5" X 32" HYDRAULIC CYLINDER (JOHN DEERE) [C22]

WARNING LIGHTS [C23]

AIR HOSE SUPPORT [C25]

HYDRAULIC MARKER BASE SUPPORTS [D01]

HYDRAULIC MARKER BASE AND LIFT CHANNEL [D02]

HYDRAULIC MARKER ARMS [D04]

HYDRAULIC MARKER ARM SUPPORT [D06]

MARKER BEARING AND DISK [D07]

SAFETY CHAIN [A09]

REAR STORAGE STAND [D08]

JACK AND PINS [D09]

DECALS [D10]

MAIN FRAME [A10]