Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | MT7237 | 1 | Cap | REEL, RH (SUB FOR ET11462) |
| 2 | 11M7086 | 1 | Cotter Pin | 2.500 X 50 mm |
| 3 | 14M7188 | 1 | Nut | M20 |
| 4 | ET11053 | 1 | Compression Spring | |
| 5 | ET11062 | 2 | Tapered Roller Bearing | (SUB AMT1108 BEARING CONE AND MT2108 BEARING CUP) |
| 6 | ET11063 | 2 | Seal | |
| 7 | M44162 | 1 | O-Ring | |
| 8 | AMT5162 | 1 | Housing | RH (SUB FOR ET11060) |
| 9 | ET11068 | 1 | Handle | SHORT |
| 10 | ET11069 | 1 | Handle | LONG |
| 11 | 19M7603 | 2 | Screw | M6 X 20, (SUB FOR ET11347) |
| 12 | 12M7006 | 4 | Lock Washer | 6 mm |
| 13 | 24M7088 | 2 | Washer | 6.600 X 12 X 1.600 mm |
| 14 | ET11071 | 2 | Clamp | |
| 15 | 19M7931 | 2 | Screw | M8 X 16, (SUB FOR ET11373) |
| 16 | ET11072 | 2 | Angle | |
| 17 | 19M6614 | 2 | Cap Screw | M6 X 12, (SUB FOR ET11374) |
| 18 | ET13458 | 2 | Shaft Key | |
| 19 | JD7844 | 1 | Lubrication Fitting | (SUB FOR ET11340 OR JD7797) |
| 20 | AMT5163 | 1 | Housing | LH (SUB FOR ET11061) |
| 21 | ET11371 | 2 | Screw | |
| 22 | JD7844 | 2 | Lubrication Fitting | STRAIGHT (SUB FOR ET11340 OR JD7797) |
| 23 | 19M7139 | 6 | Cap Screw | M8 X 20 |
| 24 | 12M7065 | 3 | Lock Washer | 8 mm |
| 25 | ET11070 | 2 | Compression Spring | |
| 26 | ET13464 | 1 | Shift Collar | |
| 27 | ET13466 | 1 | Roller Chain | |
| 28 | ET13465 | 1 | Spacer | |
| 29 | ET13461 | 1 | Chain Sprocket | |
| 30 | ET13462 | 2 | Bearing | |
| 31 | 40M1863 | 1 | Snap Ring | (SUB FOR ET13463) |
| 32 | ET13460 | 1 | Spacer | |
| 33 | 40M7080 | 1 | Snap Ring | (SUB FOR ET11059) |
| 34 | ET11067 | 1 | Shoe | BED KNIFE |
| 34 | MT7314 | 1 | Shoe | LOW-CUT (SUB FOR MT101, MT2364 OR MT2665) |
| 35 | ET11372 | 2 | Bolt | |
| 36 | 21M7194 | 7 | Screw | M6 X 12, (SUB FOR ET11370) |
| 37 | UC18873 | 1 | Stationary Knife | Height of Cut = 3.2 mm, STD, SUB FOR ET14402 AND ET17490 OR ET17533 |
| 37 | ET11066 | 1 | Stationary Knife | Height of Cut = 3.2 mm, Standard Greens W/ Hardened Insert |
| 37 | UC18869 | 1 | Stationary Knife | 22 inch, Height of Cut = 2.5 mm, Tournament, SUB FOR ET10177 OR ET17534 |
| 38 | AMT2884 | 1 | Reel | (SUB FOR ET13457) |
| .. | AM102423 | 1 | Chain Link | COUPLER (MASTER) |
| .. | ET11408 | AR | Roller Chain | Offset |
