CRANKSHAFT, IDLER GEAR AND MAIN BEARINGS [01F06] CRANKSHAFT AND MAIN BEARINGS 0401 643 Feller Buncher PC2184 in FELLER BUNCHER 643

№	Number	Qty	Name	Options
1	RE24959	1	SEAL	(USE IF AVAILABLE) (SUB FOR AR92893)
1	RE44574	1	Seal	(SUB FOR RE24959)
2	A120R	1	Dowel Pin	(SUB FOR T26565, THIS APPLICATION)
3	26H72	1	Shaft Key	1/8" X 5/8"
4	T20094	1	Helical Gear	(24 TEETH)
5	[]	1		RE45517,MARKED R54619 NO LONGER AVAILABLE (SUB FOR RE33687,MARKED R54619)SUB RE502191 CRANKSHAFT KIT.
6	T26324	2	THRUST WASHER
7	R89824	1	Shaft	(SUB FOR T26323)
8	34H283	1	Spring Pin	3/16" X 1-1/8"
9	T20034	1	Bushing
10	AR91660	1	Gear	(55 TEETH) (MARKED R70182)
11	T26326	2	THRUST WASHER
12	T26327	1	Screw
13	T20046	1	Oil Slinger
14	AR67942	1	Seal
15A	T26325	2	SCREW
15B	19H3183	1	CAP SCREW	HS, SAE 8, 1/2" X 2-1/8"
16A	R76126	2	Washer
16B	R100105	1	Washer
17	T26321	1	Bushing
18	AT24252	1	GEAR	(45 TEETH) (MARKED T26322)
19	34H286	1	Spring Pin	3/16" X 1-1/2"
20	AT21140	6	Bearing	STANDARD (SET OF (2) T23214)
20	[]	6		( AT21108 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE (SET OF (2) T23552)
20	AT21110	6	BEARING	0.25 MM (0.10") UNDERSIZE (SET OF (2) T23554)
20	AT21112	6	BEARING	0.51 MM (.020") UNDERSIZE (SET OF (2) T23556)
20	AT21114	6	BEARING	0.76 MM (.030") UNDERSIZE (SET OF (2) T23558)
21	AT21139	1	BEARING	STANDARD (SET OF (2) T23215)
21	[]	1		( AT21130 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE (SET OF (2) T23574)
21	AT21132	1	BEARING	0.25 MM (.010") (SET OF (2) T23576)
21	AT21134	1	BEARING	0.51 MM (.020") UNDERSIZE (SET OF (2) T23578)
21	AT21136	1	BEARING	0.76 MM (.030") UNDERSIZE (SET OF (2) T23580)
22	T26323	1	SHAFT	(SUB R89824, R100105, 19H3183 AND E69392)
22	R89824	1	Shaft
23	E69392	1	Nut	(SUB FOR 14H865, THIS APPLICATION)
24	H35244	1	Ring
25	T26270	1	SEAL
25	R81989	1	Sleeve