AtlasCarParts

WING LIFT HYDRAULIC CYLINDER (JOHN DEERE) 88.9 MM BORE X 812.8 MM STROKE (3-1/2" X 32") [D09] 70 HYDRAULIC 235 Wing-Fold Disk PC2178 in DISK 235


  1. Home
  2. Turf And Utility
  3. DISK
  4. DISK 235
  5. 235 Wing-Fold Disk PC2178
  6. 70 HYDRAULIC
  7. WING LIFT HYDRAULIC CYLINDER (JOHN DEERE) 88.9 MM BORE X 812.8 MM STROKE (3-1/2" X 32") [D09]
WING LIFT HYDRAULIC CYLINDER (JOHN DEERE) 88.9 MM BORE X 812.8 MM STROKE (3-1/2" X 32") [D09]

Parts list:

 №  Number Qty Name Options
1   A34074   1  PIN FASTENER 25.400 X 119.380 MM (1" X 4.700")  
2   11M7056   2  Cotter Pin 8 X 50 MM  
3   R80114   1  HYDRAULIC HEAD AND ROTOR  
4   R81238   1  HYDRAULIC CYLINDER BARREL  
5   BT575A   1  NUT 28.575 MM (1-1/8")  
6   R80130   1  Piston  
7   U44495   1  WASHER 83.718 X 89.560 X 2.921 MM (3.296" X 3.526" X 0.115")  
8   U44496   1  O-Ring  
9   H35238   1  O-Ring  
10   A22156   1  END NOT USED ON HYD. WING CONTROL  
11   22H842   1  SET SCREW 1/4" X 5/16"  
12   R81239   1  ROD  
13   []   1  (SUB RE16580)  
14   []   1  (SUB RE16580)  
15   14H888   4  Nut 9/16"  
16   A20816   1  BUSHING  
17   R78993   2  BACK-UP RING  
18   U10776   2  O-Ring  
19   RE16580   1  HYDRAULIC CYLINDER KIT  
20   R80128   1  Hydr. Cylinder Rod Guide  
21   R81240   4  STUD  
22   R39112   1  Fitting  
22   T22867   1  Drain Plug  
23   R26375   1  O-Ring  
24   A47028   2  Orifice  
25   RE19382   1  HYDRAULIC CYLINDER  
26   19H2825   1  Cap Screw 3/4" X 4-1/4"  
26   14H1058   1  Nut 3/4"  

Next page:

70-57
WING FRAME HYDRAULIC CYLINDER (JOHN DEERE) 101.6 MM BORE X 812.8 MM STROKE (4" X 32") [D10]
WING FRAME HYDRAULIC CYLINDER (JOHN DEERE) 101.6 MM BORE X 812.8 MM STROKE (4" X 32") [D10]
70-58
WING FRAME HYDRAULIC CYLINDER (JOHN DEERE) 101.6 MM BORE X 812.8 MM STROKE (4" X 32") [D11]
WING FRAME HYDRAULIC CYLINDER (JOHN DEERE) 101.6 MM BORE X 812.8 MM STROKE (4" X 32") [D11]
70-59
WING LIFT HYDRAULIC CYLINDERS, FITTINGS AND HOSES (1980-1982) 8.3 M (27'1"), 8.3 M (27'3"), 9.0 M (29'6"), 9.2 M (30'1") SIZES [D12]
WING LIFT HYDRAULIC CYLINDERS, FITTINGS AND HOSES (1980-1982) 8.3 M (27'1"), 8.3 M (27'3"), 9.0 M (29'6"), 9.2 M (30'1") SIZES [D12]
70-6
WHEEL FRAME HYDRAULIC CYLINDER (CROSS) 101.6 MM BORE X 203.2 MM STROKE (4" X 8") [B09]
WHEEL FRAME HYDRAULIC CYLINDER (CROSS) 101.6 MM BORE X 203.2 MM STROKE (4" X 8") [B09]
70-60
WING LIFT HYDRAULIC CYLINDER (CROSS) 101.6 MM B0RE X 812.8 MM STROKE (4" X 32") [D13]
WING LIFT HYDRAULIC CYLINDER (CROSS) 101.6 MM B0RE X 812.8 MM STROKE (4" X 32") [D13]
70-55
WING LIFT HYDRAULIC CYLINDER (JOHN DEERE) 88.9 MM BORE X 812.8 MM STROKE (3-1/2" X 32") [D08]
WING LIFT HYDRAULIC CYLINDER (JOHN DEERE) 88.9 MM BORE X 812.8 MM STROKE (3-1/2" X 32") [D08]
70-54
WING LIFT HYDRAULIC CYLINDER (CROSS) 88.9 MM BORE X 812.8 MM STROKE (3-1/2" X 32") [D07]
WING LIFT HYDRAULIC CYLINDER (CROSS) 88.9 MM BORE X 812.8 MM STROKE (3-1/2" X 32") [D07]
70-52
HYDRAULIC WING CONTROL ATTACHMENT (017001- ) 6.9 M (22'9"), 7.0 M (23'0"), 7.7 M (25'3") AND 7.8 M (25'7") SIZES [D05]
HYDRAULIC WING CONTROL ATTACHMENT (017001- ) 6.9 M (22'9"), 7.0 M (23'0"), 7.7 M (25'3") AND 7.8 M (25'7") SIZES [D05]
70-50
HYDRAULIC WING CONTROL ATTACHMENT ( -017000) 6.9 M (22'9"), 7.0 M (23'0"), 7.7 M (25'3") AND 7.8 M (25'7") SIZES [D03]
HYDRAULIC WING CONTROL ATTACHMENT ( -017000) 6.9 M (22'9"), 7.0 M (23'0"), 7.7 M (25'3") AND 7.8 M (25'7") SIZES [D03]
70-5
WHEEL FRAME HYDRAULIC CYLINDER (JOHN DEERE) 88.9 MM BORE X 203.2 MM STROKE (3-1/2" X 8") [B08]
WHEEL FRAME HYDRAULIC CYLINDER (JOHN DEERE) 88.9 MM BORE X 203.2 MM STROKE (3-1/2" X 8") [B08]