AtlasCarParts

Frame And Mast (Radial Ripper For 450G And 455G Crawler) 4240 FRAME 450G, 455G, 550G, 555G and 650G Crawler Loaders and Bulldozers PC2154 in BULLDOZER 450G


  1. Home
  2. Construction And Forestry
  3. BULLDOZER
  4. BULLDOZER 450G
  5. 450G, 455G, 550G, 555G and 650G Crawler Loaders and Bulldozers PC2154
  6. 4240 FRAME
  7. Frame And Mast (Radial Ripper For 450G And 455G Crawler)
Frame And Mast (Radial Ripper For 450G And 455G Crawler)

Parts list:

 №  Number Qty Name Options
1   19M7872   4  Cap Screw M12 X 25, (PIN RETAINER TO RIPPER MAST)  
2   24H1162   4  Washer 17/32" X 1-1/4" X 0.060"  
3   28H3418   4  Washer 0.546" X 0.840" X 5/16"  
4   AT120459   2  PIN (CYLINDER TO MAST)  
5   AT104882   2  MAST (RIPPER) (TO REAR OF TRANSVERSE HOUSING)  
6   U11651   10  Washer (4 USED-INSTALL AT HEAD END, HYDRAULIC CYLINDER PIVOT, OPPOSITE THE TRACTOR CENTERLINE) (4 USED-RIPPER MAST TO RIPPER FRAME PINS-INSTALL 2 WASHERS TO OUTSIDE OF TRACTOR RIGHT SIDE; INSTALL 2 WASHERS T  
7   U42521   2  Bushing (INSTALL ON THE HEAD END, HYDRAULIC CYLINDER, PIVOT, TOWARD THE TRACTOR CENTERLINE)  
8   19M7358   1  Cap Screw M10 X 40, (TO CLAMP AT SUPPORT BRACKET)  
9   19M8224   16  Cap Screw M20 X 60, (RIPPER MAST TO TRANSVERSE HOUSING COVER)  
10   24M7242   16  Washer 21.400 X 42 X 5 mm  
11   T105414   1  BRACKET (HYDRAULIC HOSE SUPPORT)  
12   T38967   1  CLAMP (HYDRAULIC HOSE TO SUPPORT BRACKET)  
13   U10699   2  BUSHING  
14   JD7759   4  Lubrication Fitting  
15   AT120460   2  PIN (RIPPER FRAME TO MAST WITH GREASE FITTING)  
16   11H223   2  COTTER PIN 3/8" X 2"  
17   AU11564   2  PIN FASTENER (CYLINDER ROD TO RIPPER FRAME) (WITH GREASE FITTING)  
18   24M7239   1  Washer 10.700 X 21 X 2.500 mm  
19   U15522   AR  GROOVE PIN (3 TO 5 USED)  
20   U15517   AR  TOOTH (3 TO 5 USED)  
21   T66192   AR  SHANK (3 TO 5 USED)  
22   []   AR  (SUB AT57474 ) (SUB FOR U17204)(3 TO 5 USED)  
23   U40130   AR  LEAF SPRING (3 TO 5 USED)  
24   19H2020   AR  Cap Screw 5/16" X 1/2", (3 TO 5 USED)  
24   12M7065   AR  Lock Washer 8 mm, (3 TO 5 USED)  
25   14M7274   1  Nut M10, (HOSE CLAMP TO SUPPORT BRACKET SCREW)  
26   U10120   2  BUSHING (INSTALL ON THE RIPPER FRAME PIVOT PIN, TOWARD THE TRACTOR CENTERLINE)  
27   AT125241   1  RIPPER (DOZER VERSION) (ALSO INCLUDES HYDRAULICS SHOWN ON DIFFERENT PAGES)  
27   AT104897   1  RIPPER (LOADER VERSION) (ALSO INCLUDES HYDRAULICS SHOWN ON DIFFERENT PAGES)  

Next page: