Parts list:
| № | Number | Qty | Name | Options |
|---|---|---|---|---|
| 1 | AT123907 | 1 | Lever | (PARK BRAKE LOCK LEVER) (INTO FRONT OF SHIFT QUADRANT CASTING) |
| 1 | AT150810 | 1 | Lever | (DX75M HITACHI-DEERE) |
| 1 | 28H1919 | 2 | Bushing | 0.622" X 0.840" X 15/16", (INSTALL BETWEEN BEARINGS IN PARK BRAKE LOCK LEVER) |
| 2 | T48823 | 1 | Knob | (SUB FOR T122468) |
| 3 | AT125243 | 1 | Tie Rod Assembly | (SUB FOR AT124028)(VERTICAL SPEED SELECTOR) |
| 4 | AT104700 | 1 | Tie Rod Assembly | (VERTICAL DIRECTION SELECTOR) |
| 5 | AT168128 | 1 | Lever | (SUB FOR AT123959)(GEAR SHIFT) |
| 6 | R76502 | 1 | Knob | |
| 7 | [] | 1 | (SUB AT159994)(PARK BRAKE LOCK) | |
| 7 | AT159994 | 1 | Bellcrank | (CONTAINS AT161248, 11M7087 AND 34H327 ) (SUB FOR AT123922 AND AT142375) |
| 7 | 28H1682 | 3 | Bushing | 0.622" X 0.840" X 7/16", (2-BETWEEN BALL BEARINGS IN HUB OF BELLCRANK) (ON SCREW AFTER SPRING ROD) |
| 8 | R57438 | 1 | Spring | (ON STRAP BETWEEN BELLCRANK PIN AND CAPSCREW IN QUADRANT CASTING) |
| 8 | T140608 | 1 | Spring | (DX75M HITACHI-DEERE) |
| 9 | T141835 | 1 | Insert | (SUB FOR T105227 AND T140701) (TRANSMISSION CONTROL, INSERT)(FOR FASTENERS SEE |
| 10 | T139903 | 1 | Support | (SUB FOR T121414 AND T126933)(BOLT BELLCRANK SUPPORT TO FRONT 3-HOLE PATTERN ON THE FRONT LEFT CORNER ON TOP OF TRANSVERSE CASE) |
| 11 | T121427 | 1 | Bellcrank | (SPEED SELECTOR) |
| 11 | 28H1682 | 1 | Bushing | 0.622" X 0.840" X 7/16", (BETWEEN BALL BEARINGS IN HUB OF BELLCRANK) |
| 12 | T139904 | 1 | Bellcrank | (SUB FOR T105232)(DIRECTION SELECTOR) |
| 12 | 28H1682 | 1 | Bushing | 0.622" X 0.840" X 7/16", (BETWEEN BALL BEARINGS IN HUB OF BELLCRANK) |
| 12 | 24M7238 | 2 | Washer | 8.700 X 17 X 2 mm, (BETWEEN OUTER BEARING IN BELLCRANK BOSS AND INNER WALL OF THE THIN EAR OF THE BELLCRANK SUPPORT) |
| 13 | AT104705 | 2 | Tie Rod Assembly | (DOZERS) |
| 13 | AT104698 | 2 | Tie Rod Assembly | (455G AND 555G) |
| 14 | R65667 | AR | Washer | (AR-ONE AT EACH END OF BOSSES OF DIRECTION SELECTOR AND SPEED SELECTOR BELLCRANK) (3-TWO WASHERS BETWEEN QUADRANT CASTING AND PARK BRAKE LOCK LEVER, ON THROTTLE LEVER SIDE AND ONE WASHER ON OPPOSITE S |
| 15 | AT150206 | 4 | BALL BEARING | (SUB FOR JD10181, THIS APPLICATION)(2-SPEED SELECTOR BELLCRANK) (2-PRESS BEARINGS FLUSH WITH EACH END OF PARK LOCK LEVER AFTER INSERTING PIPE SPACERS) |
| 15 | AT150206 | 2 | BALL BEARING | (SUB FOR JD10181, THIS APPLICATION)(DIRECTION SELECTOR BELLCRANK) |
| 15 | AT150206 | 4 | BALL BEARING | (SUB FOR JD10181, THIS APPLICATION)(DIRECTION SELECTOR BELLCRANK) |
