SWING GEARBOX [03J01] MECHANICAL DRIVE ELEMENTS 4350 690D and 690DR Excavators, 693D Feller Buncher PC2151 in FELLER BUNCHER 693D

№	Number	Qty	Name	Options
1	[]	1		(SUB FOR T107945) ( T126362 NLA)
1	T107945	1	PINION SHAFT	(SERIAL NUMBER APPLIES IF UNIT HAS ORIGINALLY INSTALLED SWING BEARING, IF SWING BEARING HAS BEEN REPLACED, THEN REPLACEMENT PINION NEEDS TO BE INSTALLED) (SHAFT HAS 26 TEETH ON THE SMALL END AND 14 ON
1	[]	1		(SHAFT HAS 26 TEETH ON THE SMALL END AND 11 ON THE OTHER) ( T126362 NLA)
2	T107954	1	Cover
3	T206287	1	Seal	(SUB FOR T107876)
4	RE50957	1	Tapered Roller Bearing	(SUB FOR JD10043)
4	RE50957	1	Tapered Roller Bearing	(SUB FOR JD10042)
5	T107946	1	HOUSING
6	[]	1		( T107890 NLA)
7	T206286	1	Seal	(SUB FOR T107875)
8	JD10438	1	Tapered Roller Bearing
9	T107955	1	Spacer
10	U43352	1	O-Ring
11	T107956	1	Nut
12	T206279	1	SEAL	(SUB FOR AT112723)
13	T107948	1	Planet Pinion Carrier
14	[]	1		(SUB AT169970)
15	AT169970	4	Gear	(SUB FOR AT114846) (INCLUDES BEARING)
16	40M7046	4	Snap Ring
17	T107833	1	Washer
18	40M7047	1	Snap Ring
19	T107953	1	Gear
20	14M7276	2	Nut	M16
21	42M3454	2	Stud
22	[]	2		(USE (2) 14M7276 AND (2) 42M3454)
23	T107828	2	Washer
24	T107883	1	O-Ring
25	T107952	1	Gear
26	U42016	2	O-Ring
27	19M8881	12	Screw	M10 X 30
28	[]	2		NO LONGER REQUIRED
29	AT112799	1	Fitting Plug
30	T107957	1	Housing
31	15M7032	1	Pipe Plug
32	T107869	1	Orifice
33	34M7113	6	Spring Pin	(SUB FOR 34M6994)
34	T107959	6	Disk
35	T107958	5	Disk