SWING MOTOR AND CROSSOVER RELIEFS [03J10] HYDRAULIC SYSTEM 4360 690D and 690DR Excavators, 693D Feller Buncher PC2151 in FELLER BUNCHER 693D

№	Number	Qty	Name	Options
1	AT112816	1	KIT	SNAP RINGS (4)
2	T107921	1	Cover	(LATEST DESIGN - HAS "NO" O-RING GROOVE)
3	T152423	1	O-RING	(K) USE WITH T107921 COVER
3	T107881	1	O-Ring	(K) USE WITH T107922 HOUSING
4	AT112724	1	Seal	(K)
5	T107922	1	Housing	(LATEST DESIGN - HAS "TWO" GROOVES; ONE FOR SNAP RING AND ONE FOR O-RING T107881) NOTE: IF REPLACING ONE GROOVE HOUSING WITH TWO GROOVE HOUSING, MUST ALSO ORDER T107921, T107881 AND AT112816.
6	T107925	1	Spacer
7	JD10424	1	Bearing Cone
7	JD8251	1	Bearing Cup
8	T107924	1	Shaft
9	44M7087	1	Pin
10	T107926	1	Plate
11	AT112739	9	Piston
12	[]	1		(SUB AT112741)
13	AT112741	1	Disk
14	T107974	3	Needle
15	AT112740	1	Cylinder Block
16	T107830	2	Washer
17	T107861	1	Spring
18	40M7157	1	Snap Ring
19	T107829	1	Washer
20	JD10426	1	Bearing Cone	(INCLUDES BEARING CUP AND CONE)
21	T107927	1	Plate
22	15M7045	1	Drain Plug
23	51M7000	1	Sealing Ring
24	15M7033	1	Pipe Plug
25	19M8444	4	Screw	M12 X 60
26	T107923	1	ADAPTER FITTING
26	T125588	1	Cover
27	44M1135	1	Dowel Pin
28	T115240	1	Nut
29	T115239	1	SCREW
30	[]	1		(SUB AT125518)
31	T16975	1	O-RING
32	[]	1		(SUB AT125518)
33	[]	1		(SUB AT125518)
34	[]	1		(SUB AT125518)
35	[]	1		(SUB AT125518)
36	[]	1		(SUB AT125518)
37	[]	1		(SUB AT125518)
38	[]	1		(SUB AT125518)
39	[]	1		(SUB AT125518)
40	T74549	1	O-RING
41	R80632	1	O-Ring
42	AT125518	2	PRESSURE RELIEF VALVE
43	AT320799	1	HYDRAULIC MOTOR	(SUB FOR AT112815) (SUB FOR AT132795)
43	AT320799	1	HYDRAULIC MOTOR	(SUB FOR AT112815) (SUB FOR AT132795)