AtlasCarParts

HYDRAULIC CYLINDER LIFT BRACKETS AND SUPPORTS [B10] 0 Non Sectionalized Catalog 8500 Series 3-Section Folding Grain Drill PC2136 in DRILL, GRAIN 8500


  1. Home
  2. Turf And Utility
  3. DRILL, GRAIN
  4. DRILL, GRAIN 8500
  5. 8500 Series 3-Section Folding Grain Drill PC2136
  6. 0 Non Sectionalized Catalog
  7. HYDRAULIC CYLINDER LIFT BRACKETS AND SUPPORTS [B10]
HYDRAULIC CYLINDER LIFT BRACKETS AND SUPPORTS [B10]

Parts list:

 №  Number Qty Name Options
1   S2411M   1  Pin Fastener  
2   11M7084   AR  Cotter Pin 5 X 25 MM  
3   N10213   4  Lock Nut  
4   N165171   1  STRAP REINFORCEMENT, INNER  
5   AN160947   1  SADDLE  
6   N213514   2  STRAP  
7   N213513   2  Strap CYLINDER LINKAGE  
8   24H1447   4  Washer 1-1/32" X 1-1/2" X 0.036"  
9   W26988   2  PIN FASTENER 1" X 5.200"  
10   11M7038   4  Cotter Pin 6.300 X 40 MM  
11   14H1040   AR  Nut 1/2"  
12   12H301   AR  Lock Washer 1/2"  
13   03H1851   4  Bolt 1/2" X 1"  
14   N161919   1  SUPPORT L.H.  
15   19H1930   2  Cap Screw 1/2" X 2-1/2", (WITHOUT GANG PRESS REINFORCEMENT)  
15   19H1820   2  Cap Screw 1/2" X 3", (WITH GANG PRESS REINFORCEMENT)  
16   E62934   AR  Flange Nut  
17   19H1777   1  Cap Screw 1/2" X 1-3/4"  
18   19H1930   1  Cap Screw 1/2" X 2-1/2"  
19   24H1351   1  Washer 9/16" X 1-1/2" X 0.164"  
20   N214823   1  BRACKET HITCH, L.H.  
21   N213801   1  PLATE CYLINDER ANCHOR  
22   N214241   2  PLATE (WING DRILL ONLY)  
23   19H2123   6  Cap Screw 1/2" X 4-1/4"  
24   19H2728   2  Cap Screw 3/4" X 3" HS SAE 8  
25   K40016   2  Lock Nut  
26   19H1792   4  Cap Screw 1/2" X 1"  
27   N166026   1  REINFORCEMENT FOR GANG PRESS, R.H.  
27   N166027   1  REINFORCEMENT FOR GANG PRESS, L.H.  
28   N161918   1  SUPPORT R.H.  
29   E40367   2  Pin Fastener  
30   N161924   2  STRAP LIFT LINK  
31   19H3467   3  Screw 5/16" X 1", FULL THREAD HS SAE 8  
32   P50742   2  Bushing .406 X .750 O.D.  
33   N164635   2  SELF-LOCKING SCREW  
34   N162192   1  Sleeve  
35   28H471   1  Spacer 1.049" X 1.315" X 1-1/4"  
36   N162191   2  SPACER  
37   Q23896   1  Spring Locking Pin  
38   19H1820   1  Cap Screw 1/2" X 3"  
39   N161871   2  PLATE PIVOT (WITHOUT GANG PRESS)  
39   N212058   2  PLATE PIVOT (WITH GANG PRESS)  
40   N161869   1  Strap  
41   N214822   1  BRACKET R.H.  
42   N10219   1  SELF-LOCKING SCREW  

Next page:

39
PRESSURE SHAFT, LIFT ARMS, PRESSURE ARMS, AND BEARINGS [B12]
PRESSURE SHAFT, LIFT ARMS, PRESSURE ARMS, AND BEARINGS [B12]
40
20-INCH (50.8 CM) WHEEL AND AXLE [B13]
20-INCH (50.8 CM) WHEEL AND AXLE [B13]
43
LID AND SEED CHARTS [B15]
LID AND SEED CHARTS [B15]
44
END PANELS AND GRAIN BOX SHEETS (8500 SERIES) [B16]
END PANELS AND GRAIN BOX SHEETS (8500 SERIES) [B16]
46
END PANELS AND FRONT GRAIN BOX SHEETS (8550 SERIES) [B18]
END PANELS AND FRONT GRAIN BOX SHEETS (8550 SERIES) [B18]
34
FRONT FRAME [B08]
FRONT FRAME [B08]
33
HITCH WHEEL AND AXLE [B07]
HITCH WHEEL AND AXLE [B07]
30
HITCH SUPPORT FRAME FOR WING DRILL [B05]
HITCH SUPPORT FRAME FOR WING DRILL [B05]
28
HITCH SUPPORT FRAME AND PIVOT FOR CENTER DRILL [B03]
HITCH SUPPORT FRAME AND PIVOT FOR CENTER DRILL [B03]
26
HITCH YOKE AND HINGES [B01]
HITCH YOKE AND HINGES [B01]