CRANKSHAFT, IDLER GEARS AND MAIN BEARINGS [01D15] CRANKSHAFT AND MAIN BEARINGS 0401 595 Excavator PC2094 in EXCAVATOR 595

№	Number	Qty	Name	Options
1	RE44574	1	Seal	(SUB FOR RE24959 OR RE17831)
2	R48685	1	Dowel Pin	(SUB FOR A120R)
3	26H72	1	Shaft Key	1/8" X 5/8"
4	T20094	1	Helical Gear	(24 TEETH)
5	[]	1		RE56792(R108657)NOT AVAIL.(SUB FOR RE11026, RE33845,RE57660)SUB RE71439 CRANKSHAFT KIT.
6	T26324	2	THRUST WASHER
7	R89824	1	Shaft	(SUB FOR T26323)
8	34H283	1	Spring Pin	3/16" X 1-1/8"
9	T20034	1	Bushing
10	AR91660	1	Gear	(55 TEETH) (MARKED R70182)
11	T26326	2	THRUST WASHER
12	T26327	1	Screw
13	T20046	1	Oil Slinger
14	AR67942	1	Seal
15A	T26325	2	SCREW
15B	19H3183	1	CAP SCREW	HS, SAE 8, 1/2" X 2-1/8"
16A	R76126	2	Washer
16B	R100105	1	Washer
17	T26321	1	Bushing
18	AT24252	1	GEAR	(45 TEETH) (MARKED T26322)
19	34H286	1	Spring Pin	3/16" X 1-1/2"
20	RE27352	4	Bearing Kit	(SUB FOR AT21140) STANDARD (SET OF (2) T23214)
20	[]	4		( AT21108 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE (SET OF (2) T23552)
20	RE27353	4	Bearing Kit	(SUB FOR AT21110) 0.25 MM (.010") UNDERSIZE (SET OF (2) T23554)
20	RE27360	4	Bearing	(SUB FOR AT21112) 0.51 MM (.020") UNDERSIZE (SET OF (2) T23556)
20	RE27368	4	Bearing	(SUB FOR AT21114) 0.76 MM (.030") UNDERSIZE (SET OF (2) T23558)
21	R78598	1	THRUST WASHER	STANDARD (SET OF (2) T23215)
21	[]	1		( AT21130 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE (SET OF (2) T23574)
21	R78598	1	THRUST WASHER	0.25 MM (.010") UNDERSIZE (SET OF (2) T23576)
21	AT21134	1	BEARING	0.51 MM (.020") UNDERSIZE (SET OF (2) T23578)
21	AT21136	1	BEARING	0.76 MM (.030") UNDERSIZE (SET OF (2) T23580)
22	T26323	1	SHAFT
22	R89824	1	Shaft
23	14H865	1	Nut	1/2"