CRANKSHAFT, IDLER GEARS AND MAIN BEARINGS [01D08] CRANKSHAFT AND MAIN BEARINGS 0401 350D Crawler Bulldozer and 355D Crawler Loader PC2089 in LOADER, CRAWLER 355D

№	Number	Qty	Name	Options
1	RE24959	1	SEAL	(USE IF AVAILABLE) REAR OIL
1	RE44574	1	Seal	(SUB FOR RE24959)
2	T26565	1	Dowel Pin
3	26H72	1	Shaft Key	1/8" X 5/8"
4	T20094	1	Helical Gear	CRANKSHAFT
5	RE46896	1	CRANKSHAFT	(MARKED R100142) (WITH BEARINGS AND OIL SEALS) (SUB FOR AT18031,MARKED T23516)
6	T26324	2	THRUST WASHER	INNER
7	R89824	1	Shaft	INNER GEAR, (SUB FOR T26323)
8	34H283	1	Spring Pin	3/16" X 1-1/8"
9	T20034	1	Bushing
10	AR91660	1	Gear	(MARKED R70182)
11	T26326	2	THRUST WASHER	OUTER
12	T26327	1	Screw
13	T20046	1	Oil Slinger
14	AR67942	1	Seal	FRONT OIL
15A	T26325	2	SCREW
15B	19H3183	1	CAP SCREW	HS, SAE 8, 1/2" X 2-1/8"
16A	R72126	2	Fitting	(SUB FOR R42364)
16B	R100105	1	Washer
17	T26321	1	Bushing
18	AT24252	1	GEAR	CRANKSHAFT LOWER IDLER, (MARKED T26322)
19	34H286	2	Spring Pin	3/16" X 1-1/2"
20	AT21140	3	Bearing	MAIN STANDARD (SET OF (2) T23214)
20	[]	3		( AT21108 NO LONGER AVAILABLE) MAIN, 0.05 MM (.002") UNDERSIZE (SET OF (2) T23552)
20	AT21110	3	BEARING	MAIN, 0.25 MM (.010") UNDERSIZE (SET OF (2) T23554)
20	AT21112	3	BEARING	MAIN, 0.51 MM (.020") UNDERSIZE (SET OF (2) T23556)
20	AT21114	3	BEARING	MAIN, 0.76 MM (.030") UNDERSIZE (SET OF (2) T23558)
21	AT21139	1	BEARING	MAIN STANDARD (SET OF (2) T23215)
21	[]	1		( AT21130 NO LONGER AVAILABLE) MAIN, 0.05 MM (.002") UNDERSIZE (SET OF (2) T23574)
21	AT21132	1	BEARING	MAIN, 0.25 MM (.010") UNDERSIZE (SET OF (2) T23576)
21	AT21134	1	BEARING	MAIN, 0.51 MM (.020") UNDERSIZE (SET OF (2) T23578)
21	AT21136	1	BEARING	MAIN, 0.76 MM (.030") UNDERSIZE (SET OF (2) T23580)
22	T26323	1	SHAFT
22	R89824	1	Shaft
23	14H865	1	Nut	1/2"