AtlasCarParts

HYDRAULIC TILT CONTROL VALVE LINES TO GRILLE [03J12] HYDRAULIC SYSTEM 3260 750B Crawler Bulldozer PC2041 in BULLDOZER UNDERCARRIAGE


  1. Home
  2. Construction And Forestry
  3. BULLDOZER
  4. BULLDOZER UNDERCARRIAGE
  5. 750B Crawler Bulldozer PC2041
  6. HYDRAULIC SYSTEM 3260
  7. HYDRAULIC TILT CONTROL VALVE LINES TO GRILLE [03J12]
HYDRAULIC TILT CONTROL VALVE LINES TO GRILLE [03J12]

Parts list:

 №  Number Qty Name Options
1   U12547   2  O-Ring (SUB FOR (2) F3171R) (HYDRAULIC CONTROL VALVE IN REAR TILT AND FRONT TILT PORT ADAPTERS TO VALVE)  
2   38H1175   2  Adapter Fitting  
3   T77857   6  O-Ring (USED IF KEY 10 AND 11 ARE NOT ON UNIT)  
4   AT165588   2  HYDRAULIC HOSE - FABRICATE (SUB FOR AT80667, AT80662, AT104198 AND AT104197)  
5   28H3117   1  BUSHING 0.546" X 0.840" X 1-5/16", (TUBE CLAMP ON TILT HYDRAULIC HOSES WITH HALF CLAMP, OIL COOLER HYDRAULIC HOSES TO FRONT OF MAIN FRAME)  
6   T29853   1  CLAMP (TUBE CLAMP ON TILT HYDRAULIC HOSES WITH HALF CLAMP, OIL COOLER HYDRAULIC HOSES TO FRONT OF MAIN FRAME)  
7   38H1323   2  Elbow Fitting  
8   T79955   1  PLATE  
9   T78716   2  Nut  
10   38H1416   2  Fitting (SUB FOR 38H1140) (USED IF KEY 16 AND 3 ARE PART OF FIELD KIT FOR BLADE)  
11   38H1354   2  Tube Nut (SUB FOR 38H1119) (USED IF KEY 16 AND 3 ARE PART OF FIELD KIT FOR BLADE)  
12   14H1040   4  Nut 1/2"  
13   24H1111   4  Washer 17/32" X 1-1/16" X 0.090"  
14   19H3065   1  Cap Screw 3/8" X 2"  
15   []   1  (MAKE FROM T72117 BULK MATERIAL, CUT TO LENGTH)  
16   38H1095   2  Elbow Fitting (USED IF KEY 10 AND 11 ARE NOT ON UNIT)  
17   03H1746   4  Bolt 1/2" X 1-1/4"  
18   28H1697   1  Spacer 0.493" X 0.675" X 3/4", (TUBE CLAMP, TILT HYDRAULIC HOSES, TUBE CLAMP WITH LOWER AND RAISE OIL LINES TO MAIN FRAME RIGHT SIDE)  
19   U40398   1  Clamp (TUBE CLAMP, TILT HYDRAULIC HOSES, TUBE CLAMP WITH LOWER AND RAISE OIL LINES TO MAIN FRAME RIGHT SIDE)  
20   T11234   1  Lock Nut (TUBE CLAMP, TILT HYDRAULIC HOSES, TUBE CLAMP WITH LOWER AND RAISE OIL LINES TO MIAN FRAME RIGHT SIDE)  
21   T77857   2  O-Ring  

Next page:

3260-34
DOZER BLADE TILT CYLINDER, GUARDS AND HOSES (MODEL 6525) (WIDE, LOW GROUND PRESSURE, STRAIGHT AND NARROW GAUGE) [03J13]
DOZER BLADE TILT CYLINDER, GUARDS AND HOSES (MODEL 6525) (WIDE, LOW GROUND PRESSURE, STRAIGHT AND NARROW GAUGE) [03J13]
3260-36
TILT CYLINDER HOSE PROTECTION [03J15]
TILT CYLINDER HOSE PROTECTION [03J15]
3260-38
RIGHT-HAND AND LEFT-HAND TILT CYLINDER HOSES AND TUBES (MODEL 6520) (ANGLE DOZERS WITH HYDRAULIC TILT) [03J17]
RIGHT-HAND AND LEFT-HAND TILT CYLINDER HOSES AND TUBES (MODEL 6520) (ANGLE DOZERS WITH HYDRAULIC TILT) [03J17]
3260-3A
TILT CYLINDER (SERIAL NO.XXXXXX- ) [03I06]
TILT CYLINDER (SERIAL NO.XXXXXX- ) [03I06]
3260-4
TILT CYLINDER KIT (HYDRAULIC TILT STRAIGHT DOZER) (LOW GROUND PRESSURE TRACK) [03I08]
TILT CYLINDER KIT (HYDRAULIC TILT STRAIGHT DOZER) (LOW GROUND PRESSURE TRACK) [03I08]
3260-31
PUMP TO RESERVOIR AND CONTROL VALVE [03J11]
PUMP TO RESERVOIR AND CONTROL VALVE [03J11]
3260-30
END PLATE [03J10]
END PLATE [03J10]
3260-3
TILT CYLINDER (MODEL 6525) (HYDRAULIC TILT STRAIGHT DOZER) (LOW GROUND PRESSURE TRACK) (SERIAL NO. -XXXXXX) [03I05]
TILT CYLINDER (MODEL 6525) (HYDRAULIC TILT STRAIGHT DOZER) (LOW GROUND PRESSURE TRACK) (SERIAL NO. -XXXXXX) [03I05]
3260-29A
BLADE SECTION WITH CIRCUIT RELIEF VALVES (SERIAL NO. 756759- ) [03J08]
BLADE SECTION WITH CIRCUIT RELIEF VALVES (SERIAL NO. 756759- ) [03J08]
3260-28
BLADE SECTION WITH CIRCUIT RELIEF VALVES (SERIAL NO. -756758) [03J06]
BLADE SECTION WITH CIRCUIT RELIEF VALVES (SERIAL NO. -756758) [03J06]