AtlasCarParts

SUB FRAME FOR ALL HYDRAULIC DOZER [02L07] FRAME INSTALLATION 1740 750B Crawler Bulldozer PC2041 in BULLDOZER UNDERCARRIAGE


  1. Home
  2. Construction And Forestry
  3. BULLDOZER
  4. BULLDOZER UNDERCARRIAGE
  5. 750B Crawler Bulldozer PC2041
  6. FRAME INSTALLATION 1740
  7. SUB FRAME FOR ALL HYDRAULIC DOZER [02L07]
SUB FRAME FOR ALL HYDRAULIC DOZER [02L07]

Parts list:

 №  Number Qty Name Options
1   19H2710   52  Cap Screw 5/8" X 1-3/4", (REAR BOLTING PLATE TO SIDE FRAMES)  
2   24M7241   AR  Washer 17 X 34 X 4 MM, (52 USED-REAR BOLTING PLATE TO SIDE FRAME SCREWS) (4 USED-SIDE FRAMES TO MAIN FRAME SCREWS- REAR TWO HOLES) (2 USED-SIDE FRAMES TO MAIN FRAME SCREWS-THIRD HOLE FROM REAR) (2 USED- SIDE  
3   19H2599   6  Cap Screw 5/8" X 2-1/2", (4 USED-SIDE FRAMES TO MAIN FRAME-REAR TWO HOLES) (2 USED-SIDE FRAMES TO MAIN FRAME- THIRD HOLE FROM REAR)  
4   19H2706   12  Cap Screw 5/8" X 2", (CENTER BOLTING PLATE TO SIDE FRAMES)  
5   19H3208   2  Cap Screw 5/8" X 3", (SIDE FRAMES TO MAIN FRAME-FOURTH HOLE FROM REAR)  
6   A11667   12  Washer (8 USED-SIDE FRAMES TO PLATE TO BOLTING PLATE SCREWS) (4 USED-SIDE FRAME,PLATE,GRILLE HOUSING TO MAIN FRAME SCREWS)  
7   19H3629   12  Cap Screw 7/8" X 7", (8 USED-SIDE FRAMES TO PLATE TO BOLTING PLATE) (4 USED-SIDE FRAME,PLATE,GRILLE HOUSING TO MAIN FRAME)  
8   AT87338   1  FRAME (LEFT)  
8   AT150670   1  FRAME (STANDARD LEFT SIDE FRAME)  
8   AT143159   1  FRAME (LEFT SIDE FRAME LONG TRACK)  
9   14H1051   4  NUT 7/8", (SIDE FRAME,PLATE,GRILLE HOUSING TO MAIN FRAME SCREWS)  
10   AT87337   1  FRAME (RIGHT)  
10   AT150668   1  FRAME (STANDARD RIGHT SIDE FRAME)  
10   AT143157   1  FRAME (RIGHT SIDE FRAME LONG TRACK)  
11   AT87346   1  Ball (BALL PIVOT, MOUNTING ASSEMBLY)(INCLUDES (2) T84666 PLATES, (2) T84771 TRUNNION BALLS AND (1) T84754 SHAFT)  
12   28H2499   4  Bushing 0.742" X 1.050" X 5/8", (2 USED-SIDE FRAMES TO MAIN FRAME SCREWS- THIRD HOLE FROM REAR-TACK WELD TO SIDE FRAME) (2 USED-SIDE FRAMES TO MAIN FRAME SCREWS- FOURTH HOLE FROM REAR-TACK WELD TO SIDE FRAME)  
13   28H1885   4  Bushing 0.824" X 1.050" X 1/2", (PIPE SPACER) (SIDE FRAMES TO MAIN FRAME SCREWS-REAR TWO HOLES-TACK WELD TO SIDE FRAMES)  

Next page:

1740-4
CENTER FRAME [02L06]
CENTER FRAME [02L06]
1740-3
C-FRAME MOUNTING PIN (INSIDE DOZER) [02L05]
C-FRAME MOUNTING PIN (INSIDE DOZER) [02L05]
1740-2
MAIN FRAME (1.6M (64") GAUGE TRACK) (LOW GROUND PRESSURE TRACK) [02L04]
MAIN FRAME (1.6M (64") GAUGE TRACK) (LOW GROUND PRESSURE TRACK) [02L04]
1740-1
MAIN FRAME [02L03]
MAIN FRAME [02L03]