160-MINUTE RESERVE CAPACITY BATTERIES WITH CABLES AND MOUNTING [02E07] BATTERIES, SUPPORT AND CABLES 1671 655B Crawler Loader PC2040 in LOADER, CRAWLER 655B

№	Number	Qty	Name	Options
1	19H1648	2	Cap Screw	3/8" X 3/4"
2	24H1308	2	Washer	13/32" X 1" X 0.134"
3	AT72173	1	BATTERY CABLE	(SUB FOR AT72163)
4	R72659	1	Clamp	(SUB FOR AH83545)
5	AT11880	2	FRAME
6	AT74430	1	BATTERY CABLE
7	R41439	1	Grommet
8	AT38449	1	Ground Cable
9	24H1308	1	Washer	13/32" X 1" X 0.134"
10	14H786	5	Nut	1/4"
10	M40333	4	Lock Nut
11	T33177	AR	WASHER
12	19H3472	4	Cap Screw	5/8" X 9-3/4"
13	19H2898	3	Cap Screw	1/2" X 1-1/4"
13	19H2993	1	Cap Screw	1/2" X 1-1/2"
14	[]	AR		(MAKE FROM T119816 BULK MATERIAL, CUT TO LENGTH) (MAKE (2) THREE FOOT PARTS, INSTALL OVER BATTERY VENTS AND ROUTE TO RIGHT SIDE SO VENT TUBE EXIT AT REAR OF RIGHT FENDER)
14	R76477	AR	Tie Band	(SUB FOR H77698, THIS APPLICATION) (SUB FOR A49232) (BAND BATTERY VENT HOSES TOGETHER AT RIGHT SIDE OF BATTERY AND BAND HOSES TO LARGE SUCTION HOSE)
14	TY21741	2	DRY CHARGED BATTERY	(SUB FOR AT29160 AND TY6106) (NO VENT TUBE HOLE)
14	TY6128	2	Dry Charged Battery
15	03H2208	4	Bolt	1/4" X 9-1/4"
16	AT46393	1	SUPPORT
16	AT112974	1	SUPPORT
17	U44618	4	PUSH NUT
18	AT72162	1	BATTERY CABLE
19	M643T	4	BUSHING
20	24H1287	4	Washer	9/32" X 5/8" X 0.065"
20	24H1288	4	Washer	9/32" X 1" X 1/16"
21	19H1648	1	Cap Screw	3/8" X 3/4"
22	U42367	2	Angle
23	14H1076	2	Nut	3/8"
24	R72659	2	Clamp	(SUB FOR AH83545)
25	T74407	1	TUBE
26	24H1308	1	Washer	13/32" X 1" X 0.134"
27	19H2676	2	Cap Screw	3/8" X 1"
28	14H826	1	Nut	1/2"
29	T74405	2	BOOT
30	R76477	AR	Tie Band	(SUB FOR T44946 AND A49232) (SUB FOR H77698, THIS APPLICATION)
31	T121288	2	Angle	(SUB FOR T79470, THIS APPLICATION)
32	T22571	4	Bolt	(SUB FOR T79471, THIS APPLICATION) (SUB FOR E58231)