SPEED CHANGE GEARS AND SHAFTS [01B18] DIFFERENTIAL OR BEVEL DRIVE 0210 455E Crawler Loader PC2037 in CRAWLER LOADER 455E

№	Number	Qty	Name	Options
1	[]	1		(SUB AT80838)
2	T64254	1	NUT	OUTPUT SHAFT THRUST
3	JD8929	1	Bearing Cone
4	JD8251	1	Bearing Cup
5	T13379	1	SNAP RING
6	T20803	AR	SHIM	0.13 MM (.005")
6	T20802	AR	SHIM	0.18 MM (.007")
6	T20804	AR	SHIM	0.25 MM (.010")
7	T20800	1	SPACER
8	T80383	1	GEAR	SECOND SPEED (31 TEETH AND 31 SPLINES)
9	T80380	2	SHIFT COLLAR
10	T20794	2	GEAR	SHIFTER (31 TEETH)
11	T31799	3	WASHER	THRUST
12	T80382	1	GEAR	FOURTH SPEED (21 TEETH)
13	T80375	1	PLATE	THRUST
14	T80381	1	GEAR	THIRD SPEED (26 TEETH AND 31 SPLINES)
15	T80379	1	GEAR	FIRST SPEED (36 TEETH AND 31 SPLINES)
16	[]	AR		(A) 0.05 MM (.002") ( T14320 NOT AVAILABLE)
16	[]	AR		(A) 0.13 MM (.005") ( T14321 NOT AVAILABLE)
16	[]	AR		(A) 0.25 MM (.010") ( T14322 NOT AVAILABLE)
17	JD8255	1	Bearing Cup
18	JD8941	1	Bearing Cone
19	T16573	1	Pin
20	17H91	10	RIVET	1/2" X 2"
21	JD9024	1	BEARING CUP
22	JD9025	1	BEARING CONE
23	T80372	1	DRIVE SHAFT	REAR DRIVE (13, 18, 22 AND 27 TEETH)
24	R43244	1	Needle Roller	(SUB FOR T36816)
25	JD9045	1	BEARING CONE
26	JD9110	1	BEARING CUP
27	T31792	AR	SHIM	0.05 MM (.002")
27	T31793	AR	SHIM	0.13 MM (.005")
27	T31794	AR	SHIM	0.25 MM (.010")
28	T31791	1	SNAP RING	RETAINING
29	T41190	1	HUB	RING GEAR
30	[]	1		(SUB AT80838)
31	AT80838	1	SHAFT	(SUB AT80835, T16573 AND T64254) (8 TEETH) WITH RING GEAR (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB (MARKED T41190)