PIVOT SHAFT [01B08] TRACK SYSTEMS 0130 850B Crawler Bulldozer PC2032 in BULLDOZER 850B

№	Number	Qty	Name	Options
1	19H2431	4	CAP SCREW	HS, SAE 8, 3/4" X 2"
2	R78019	4	Washer	(SUB FOR T21397)
3	T81898	1	Cap
4	T52919	1	Retainer	(2 HALVES USED)
5	T112635	1	Pin	(1 1/2" LONG) (USE WITH NEW PIVOT SHAFTS)
5	T52912	1	PIN	(4 1/2" LONG) (USE WITH ORIGINAL PIVOT SHAFTS)
6	T75690	8	Washer
7	T75187	4	Cap Screw
8	T52915	1	ROUND RETAINER
9	AT51496	2	SEAL
10	T73184	1	SUPPORT	A-FRAME, R.H. (ILLUSTRATED)(REQUIRES LUBRICATION FITTING KEY 16) (SUB FOR T59033)
10	T73185	1	SUPPORT	A-FRAME, L.H. (REQUIRES LUBRICATION FITTING KEY 16) (SUB FOR T59034)
10	T112642	1	SUPPORT	A-FRAME,R.H.(WITH REMOTE LUBRICATION)
10	T112643	1	SUPPORT	A-FRAME,L.H.(WITH REMOTE LUBRICATION)
11	T52908	1	BUSHING
12	T52918	AR	Shim	0.51 MM (.020")
13	T112649	1	Bracket	(SUB FOR T61089)
14	19H3534	4	Cap Screw	HS, SAE 8, 1" X 7-1/2"
15	T49336	1	Dowel Pin
16	JD7759	1	Lubrication Fitting	(WITH OUT REMOTE LUBRICATION)
17	AT150504	1	SHAFT	(SUB FOR AT51127 AND AT113502) L.H.(LONG TRACK)
17	AT151711	1	SHAFT	(SUB FOR AT70297 AND AT113504) L.H. (LOW GROUND PRESSURE TRACK)
17	AT150503	1	SHAFT	R.H. (LONG TRACK) (SUB FOR AT51126 AND AT113501) (ILLUSTRATED)
17	AT151710	1	SHAFT	(SUB FOR AT70295 AND AT113503) R.H. (ILLUSTRATED) (LOW GROUND PRESSURE TRACK)
18	T82266	1	Washer
19	15H275	1	Pipe Plug	1/4"
20	T20758	1	O-Ring