AtlasCarParts

PUSH BEAMS, SUPPORTS AND PITCH JACK (LOW GROUND PRESSURE TRACK) (SERIAL NO.XXXXXX- ) [03G20] BULLDOZER FRAMES 3240 850B Crawler Bulldozer PC2032 in BULLDOZER 850B


  1. Home
  2. Construction And Forestry
  3. BULLDOZER
  4. BULLDOZER 850B
  5. 850B Crawler Bulldozer PC2032
  6. BULLDOZER FRAMES 3240
  7. PUSH BEAMS, SUPPORTS AND PITCH JACK (LOW GROUND PRESSURE TRACK) (SERIAL NO.XXXXXX- ) [03G20]
PUSH BEAMS, SUPPORTS AND PITCH JACK (LOW GROUND PRESSURE TRACK) (SERIAL NO.XXXXXX- ) [03G20]

Parts list:

 №  Number Qty Name Options
1   T154432   1  SOCKET  
2   T154413   AR  SHIM 1.52 MM (.060")  
3   T154414   AR  SHIM 0.91 MM (.036")  
4   R78019   12  Washer 19.837 X 33.325 X 4.166 MM (25/32" X 1-5/16" X 0.164") (STRUT TO 3/4 INCH CAPSCREW)  
4   R52006   8  Washer 23.012 X 40.894 X 4.775 MM (29/32" X 1.610" X 3/16") (4-PITCH JACK SOCKET CAPSCREW) (4-TILT CYLINDER SOCKET CAPSCREW)  
5   19H3368   8  Cap Screw 7/8" X 4-1/2", HS, SAE 8, 3/4" X 4-1/2"  
5   14H1077   8  Nut 7/8"  
6   BP12214   2  Lock Nut  
6   14M7328   1  Lock Nut M16, (TILT CYLINDER TO PUSH BEAM PIVOT PIN)  
7   19H3586   1  Cap Screw HS, SAE 8, 1/2" X 4-1/4"  
7   19M8043   1  Cap Screw M16 X 140  
8   T78844   1  PIN FASTENER  
8   T70635   1  Pin Fastener (CYLINDER TO PUSHBEAM RIGHT SIDE ONLY)  
9   T159940   1  YOKE (SUB FOR T78405, THIS APPLICATION) (ALSO ORDER T159911, T159996, 19H2993 AND 24M7240)  
9   T165025   1  YOKE (ALSO ORDER T159911, T159996, 19H2993 AND 24M7240)  
10   T162396   3  Lubrication Fitting (SUB FOR JD7798) 1/8", STRAIGHT  
11   T48385   2  RETAINER  
12   T154432   1  SOCKET  
13   T49097   AR  SHIM 3 MM (.120")  
14   T49096   AR  SHIM 6.4 MM (.250")  
15   T53117   1  BALL  
16   19H3105   4  Cap Screw HS, SAE 8, 3/4" X 5"  
17   T78843   1  PIN FASTENER  
18   19H3586   1  Cap Screw 1/2" X 4-1/4"  
19   T49081   1  TRUNNION BALL  
20   T47576   8  Washer (SUB FOR T19572, THIS APPLICATION)  
21   19H3255   8  Cap Screw HS, SAE 8, 7/8" X 4"  
22   T49079   1  PIVOT  
23   T49100   AR  Plate (SUB FOR T49099) 1.52 MM (.060")  
24   T58941   2  PLATE  
25   T49101   1  CAP  
26   08H4803   2  Bolt HS, SAE 8, 1" X 6-3/4"  
27   T49100   AR  Plate 0.91 MM (.036")  
28   K40018   2  Lock Nut  
29   T25877   1  BUSHING  
30   T78241   2  BUSHING  
31   AT77521   1  PIVOT  
32   T78244   2  Bushing  
33   AT80853   1  BEAM L.H.  
33   AT169348   1  BEAM R.H. (NOT ILLUSTRATED)  
34   T53118   1  END STRUT  
35   AT70492   1  SUPPORT (STRUT)  
36   T53115   1  BALL  
37   T59145   1  PIN FASTENER (SUB FOR T78849, THIS APPLICATION)  
38   T59146   2  STRAP  
39   12H301   4  Lock Washer 1/2"  
40   19H2993   4  Cap Screw 1/2" X 1-1/2"  
41   AT177238   1  Jack (SUB FOR AT171208) (REQUIRES T159996)  
41   T159996   1  Retainer  
42   AT77919   2  TRUNNION  
43   []   1  (SET OT TWO) (FOR LGP UNITS ONLY) (AT77937 NO LONGER AVAILABLE)  
44   AT171142   1  BEAM  

Next page:

3240-6
PUSH BEAMS MODEL 6545 (STRAIGHT DOZER) [03G22]
PUSH BEAMS MODEL 6545 (STRAIGHT DOZER) [03G22]
3240-7
PITCH JACK WITH YOKE (LOW GROUND PRESSURE TRACK) [03G23]
PITCH JACK WITH YOKE (LOW GROUND PRESSURE TRACK) [03G23]
3240-8
PUSHBEAM TRUNNION (LOW GROUND PRESSURE) [03G24]
PUSHBEAM TRUNNION (LOW GROUND PRESSURE) [03G24]
3240-9
"C" FRAME MODEL 6540 (ANGLE DOZER) [03G25]
"C" FRAME MODEL 6540 (ANGLE DOZER) [03G25]
3240-4
PUSH BEAMS, SUPPORTS AND PITCH JACK (LOW GROUND PRESSURE TRACK) (SERIAL NO. -XXXXXX) [03G18]
PUSH BEAMS, SUPPORTS AND PITCH JACK (LOW GROUND PRESSURE TRACK) (SERIAL NO. -XXXXXX) [03G18]
3240-3
SUPPORTS AND PITCH JACKS MODEL 6545 (STRAIGHT DOZER) [03G17]
SUPPORTS AND PITCH JACKS MODEL 6545 (STRAIGHT DOZER) [03G17]
3240-2
LIFT CYLINDER SUPPORT (LOW GROUND PRESSURE TRACK) [03G16]
LIFT CYLINDER SUPPORT (LOW GROUND PRESSURE TRACK) [03G16]
3240-13
TILT CYLINDERS AND STRUTS MODEL 6540 (ANGLE DOZER) [03H06]
TILT CYLINDERS AND STRUTS MODEL 6540 (ANGLE DOZER) [03H06]
3240-12
PITCH JACKS AND STRUTS MODEL 6540 (ANGLE DOZER) [03H05]
PITCH JACKS AND STRUTS MODEL 6540 (ANGLE DOZER) [03H05]