BATTERY (WITH 180-MINUTE RESERVE CAPACITY) [02I14] BATERIES, SUPPORT AND CABLES 1671 850B Crawler Bulldozer PC2032 in BULLDOZER 850B

№	Number	Qty	Name	Options
1	14H786	4	Nut	1/4"
1	M40333	4	Lock Nut	1/4"
2	24H1287	4	Washer	9/32" X 5/8" X 0.065"
2	24H1288	4	Washer
3	M643T	4	BUSHING
4	AT72173	1	BATTERY CABLE
5	14H826	1	Nut	1/2"
6	T74405	2	BOOT
7	AT11880	2	FRAME
8	R44302	1	Tie Band
9	19H2676	1	Cap Screw	3/8" X 1"
10	24H1308	4	Washer	13/32" X 1" X 0.134"
11	T72116	1	TUBE
12	R72659	3	Clamp	(SUB FOR AH83545)
13	19H2284	1	Cap Screw	3/8" X 7/8"
14	T35699	1	Clamp
15	T48850	1	STRAP
16	14H1076	1	Nut	3/8"
17	AT74430	1	BATTERY CABLE
18	R41439	1	Grommet
19	AT38449	1	Ground Cable
20	19H3217	1	Cap Screw	3/8" X 1-3/4"
21	19H2898	4	Cap Screw	1/2" X 1-1/4"
22	24H1288	4	Washer	9/32" X 1" X 1/16"
23	03H2208	4	Bolt	1/4" X 9-1/4"
24	AT46393	1	SUPPORT
24	AT112974	1	SUPPORT
25	U44618	4	PUSH NUT
26	AT72162	1	BATTERY CABLE
27	[]	AR		(MAKE FROM T119816 BULK MATERIAL, CUT TO LENGTH) (MAKE (2) THREE FOOT PARTS, INSTALL OVER BATTERY VENTS AND ROUTE TO RIGHT SIDE SO VENT TUBE EXIT AT REAR OF RIGHT FENDER)
27	R76477	AR	Tie Band	(SUB FOR A49232, THIS APPLICATION) (BAND BATTERY VENT HOSES TOGETHER AT RIGHT SIDE OF BATTERY AND BAND HOSES TO LARGE SUCTION HOSE)
27	TY21741	2	DRY CHARGED BATTERY	(SUB FOR TY6106) (NO VENT TUBE HOLE)
27	TY6127	2	DRY CHARGED BATTERY
28	T121288	2	Angle	(SUB FOR T79470, THIS APPLICATION)
29	T22571	4	Bolt	(SUB FOR T79471, THIS APPLICATION) (SUB FOR E58231)
30	28H1720	1	Bushing
31	19H3065	1	Cap Screw	3/8" X 2"
32	T11234	1	Lock Nut
33	24M7296	2	Washer	10.500 X 30 X 2.500 MM