AIR TUBES, MANIFOLD AND VENTURI [C01] 0 Non Sectionalized Catalog 775 Air Drill PC2018 in DRILL, AIR 775

№	Number	Qty	Name	Options
1	N210019	1	MANIFOLD	MAJOR, 4-PORT (USED ON 28 AND 32 FT. DRILL)
1	N210777	1	MANIFOLD	MAJOR, 3-PORT (USED ON 24 FT. DRILL)
2	24H1305	4	Washer	13/32" X 13/16" X 0.065"
3	AN210413	2	BAND
4	19H2007	2	Cap Screw	3/8" X 4-1/2"
5	14H812	2	NUT	3/8"
6	19H1906	4	Cap Screw	5/16" X 1-1/2"
7	24H1122	4	Washer	3/8" X 7/8" X 0.083"
8	N10213	AR	Lock Nut	5/16"
9	N210580	1	AIR DUCT	RIPPLE
10	AN211159	1	ELBOW FITTING	MAJOR, (SUB FOR AN210212)
11	N141174	1	U-Bolt
12	N213267	1	ANGLE
13	24H1370	2	Washer	21/32" X 1-3/8" X 0.134"
14	12H294	2	Lock Washer	5/8"
15	14H1039	2	Nut	5/8"
16	C18449	1	BAND
17	AN210312	1	VENTURI
18	37H95	2	Screw	NO. 8 X 1/2
19	N211003	1	SHEET	FUNNEL
20	N166787	1	NOZZLE	AIR
21	N169836	1	AIR DUCT
22	AT63292	2	CLAMP
23	AN162801	1	FLANGE	FAN EXHAUST
24	N112200	6	Self-Locking Screw	5/16" X 1"
25	03H1539	4	Bolt	5/16" X 5/8"
26	19H1813	2	CAP SCREW	5/16" X 5/8"
27	N211005	2	PIN	FEED GATE
28	N211004	1	STRAP
29	21H1295	2	Screw	0.190" X 5/8"
30	N125411	2	Lock Nut	0.190"
31	AN150214	1	Latch
32	N211002	1	SHEET	FUNNEL
33	AT25242	AR	Hose Clamp
34	[]	1		(MAKE FROM 110" OF N211313) (FOR FAR LEFT)
34	N211313	1	HOSE	(3048 MM (120")) (FOR FAR RIGHT)
34	[]	1		(MAKE FROM 35" OF N211319) (CENTER ON 24 FT. DRILL)
34	N211319	1	HOSE	(1422 MM (56")) (CENTER LEFT ON 28 AND 32 FT. DRILL)
34	[]	1		(MAKE FROM 52" OF N211319) (CENTER RIGHT ON 28 AND 32 FT. DRILL)