SPEED CHANGE GEARS AND SHAFT [01B20] DIFFERENTIAL OR BEVEL DRIVE 0210 455D Crawler Loader PC1909 in CRAWLER LOADER MASTER TRAX

№	Number	Qty	Name	Options
1	[]	1		(SUB AT59731)
2	T64254	1	NUT	OUTPUT SHAFT THRUST
3	JD8929	1	Bearing Cone
4	JD8251	1	Bearing Cup
5	T13379	1	SNAP RING
6	T20803	AR	SHIM	0.13 MM (.005")
6	T20802	AR	SHIM	0.18 MM (.007")
6	T20804	AR	SHIM	0.25 MM (.010")
7	T20800	1	SPACER
8	T31803	1	GEAR	SECOND SPEED (38 TEETH)
9	T31800	2	SHIFT COLLAR
10	T20794	2	GEAR	SHIFTER (31 TEETH)
11	T31799	3	WASHER	THRUST
12	T31802	1	GEAR	FOURTH SPEED (26 TEETH)
13	T20797	1	PLATE	THRUST
14	T31801	1	GEAR	THIRD SPEED (32 TEETH)
15	T31798	1	GEAR	FIRST SPEED (43 TEETH)
16	[]	AR		(A) 0.05 MM (.002") ( T14320 NO LONGER AVAILABLE)
16	[]	AR		(A) 0.13 MM (.005") ( T14321 NO LONGER AVAILABLE)
17	JD8255	1	Bearing Cup
18	JD8941	1	Bearing Cone
19	T16573	1	Pin
20	17H91	10	RIVET	1/2" X 2"
21	JD9024	1	BEARING CUP
22	JD9025	1	BEARING CONE
23	T31790	1	SHAFT	REAR
24	R43244	1	Needle Roller	(SUB FOR T36816)
25	JD9045	1	BEARING CONE
26	JD9110	1	BEARING CUP
27	T31792	AR	SHIM	0.05 MM (.002")
27	T31793	AR	SHIM	0.13 MM (.005")
27	T31794	AR	SHIM	0.25 MM (.010")
28	T31791	1	SNAP RING	RETAINING
29	T41190	1	HUB	RING GEAR
30	[]	1		(SUB AT59731)
31	AT59731	1	PINION SHAFT	(8 TEETH) WITH RING GEAR (MARKED T31826) (44 TEETH) (MATCHED SET) AND HUB (MARKED T41190)