TRACK ADJUSTER, SPRING AND COVERS (LOW GROUND PRESSURE TRACK) [01C01] TRACK SYSTEMS 0130 850 (Low Ground Pressure Bulldozer) Crawler Bulldozer PC1885 in BULLDOZER 850

Parts list:

№	Number	Qty	Name	Options
1	T40416	2	WEAR RING
2	T47833	1	SEAL
3A	AT70307	1	HYDRAULIC CYLINDER CAP	TRACK HEAD, (SUB AT81348, 22H908 AND T80877) (ALSO ORDER R11066 AND 44M7070) (HEAD AND ROD MUST BE REDRILLED AND HEAD MUST BE RETAPPED) (SEE SERVICE NEWSLETTER FUNTIONAL GROUP 0130 DATED 2 MARCH 1989)
3B	AT81348	1	CYLINDER HEAD	TRACK HEAD
4	T120720	1	Pressure Relief Valve	(SUB FOR T73203)
5	T73204	1	STRAP
6	19H3295	1	Screw	3/8" X 3/4"
7	JD7759	1	Lubrication Fitting
8	AT46412	1	BALL COCK VALVE
9	T73207	1	STOP
10A	T73208	1	PIN	(USE WITH AT70307)
10B	T80877	1	ROD
11	T55098	1	Yoke
12	T55099	2	DEFLECTOR
13	T21242	4	Washer
14	19H2898	4	Cap Screw	1/2" X 1-1/4"
15	B3627R	1	WASHER
16	19H2411	5	Cap Screw	3/4" X 2-1/2"
17	R78019	4	Washer	(SUB FOR T21397)
18	T73206	1	PISTON
19	R26282	1	O-Ring
20	T47828	1	SEAL
21	T82457	1	HOUSING	(SUB FOR T73205) (ALSO ORDER JD7797)
22	T72376	1	SPRING
23	19H3057	4	Cap Screw	HS, SAE 8, 1/2" X 2-3/4"
24	T20168	4	Washer
25	24M7240	3	Washer	13 X 25 X 3 MM
26	19H1815	3	Cap Screw	1/2" X 1-1/4"
27	T73232	2	SPACER
28A	34H323	1	Spring Pin	1/4" X 3"
28B	22H908	1	Set Screw	1/2" X 1/2", (SUB FOR H772R AND T105219) (ALSO ORDER R11066 AND 44M7070) (HEAD AND ROD MUST BE REDRILLED AND HEAD MUST BE RETAPPED) (SEE SERVICE NEWSLETTER FUNCTIONAL GROUP 0130 DATED 2 MARCH 1989)
29	19H2633	1	Cap Screw	3/8" X 1-1/2"
30	AT82820	1	COVER	R.H. REAR, (SUB FOR AT70301)
30	AT82821	1	COVER	L.H. REAR (NOT ILLUSTRATED) (SUB FOR AT70302)
30	AT80954	1	COVER	(SUB FOR AT80952) R.H. REAR (USE WITH LONG TRACK)
30	AT80955	1	COVER	(SUB FOR AT80953) L.H. REAR (NOT ILLUSTRATED)(USE WITH LONG TRACK)
31	T81361	1	COVER	FRONT, (SUB FOR T73187)
31	AT80868	1	COVER	FRONT (USE WITH LONG TRACK)
32	19H3472	12	Cap Screw	5/8" X 9-3/4"
33	T21242	12	Washer
34	T11234	1	Lock Nut
35	24H1305	1	Washer	13/32" X 13/16" X 0.065"