HOOD (WITHOUT CAB) [03G18] HOOD OR ENGINE ENCLOSURE 1910 850 (Low Ground Pressure Bulldozer) Crawler Bulldozer PC1885 in BULLDOZER 850

№	Number	Qty	Name	Options
1	AT50039	1	SUPPORT	(SUB AT104178)
1	AT104178	1	SUPPORT	(SUB FOR AT50039)
2	12H301	4	Lock Washer	1/2"
3	19H2993	2	Cap Screw	HS, SAE 8, 1/2" X 1-1/2" (USED WITH AT134992 AND AT104178)
4	T31501	1	KNOB
5	T14057	1	SPRING
6	AT39757	1	HINGE
7	T21333	2	LATCH
8	[]	AR		(MAKE FROM T58341 BULK MATERIAL, CUT TO LENGTH) (SUB FOR T51694)
9	24H1162	2	Washer	17/32" X 1-1/4" X 0.060", (USED WITH AT134992 AND AT104178)
10	[]	AR		(MAKE FROM T58341 BULK MATERIAL, CUT TO LENGTH) (SUB FOR T51686)
11	34H266	1	Spring Pin	5/32" X 1"
12	T47585	1	CLAMP	(SUB FOR T31597, THIS APPLICATION)
13	T126244	1	DOOR	(SUB FOR T51684)
14	T21306	1	BASE
15	AT50038	1	HOOD	(SUB AT134992)
15	AT104176	1	HOOD	(USE IF AVAILABLE) (SUB FOR AT62468, AT50038, AT80907 AND AT81291)
15	AT134992	1	HOOD	(SUB FOR AT104176)
16	19H3579	4	Cap Screw	1/2" X 1-3/8"
17	19H2993	5	Cap Screw	HS, SAE 8, 1/2" X 1-1/2" (USED WITH AT62468, AT50038, AT80907, AT81291 AND AT50039)
18	24H1162	5	Washer	17/32" X 1-1/4" X 0.060", (USED WITH AT62468, AT50038, AT80907, AT81291 AND AT50039)
19	[]	AR		(MAKE FROM T58341 BULK MATERIAL, CUT TO LENGTH) (2 PIECES 9" LONG - CAB SIDE)