PIVOT SHAFT [01B09] TRACK SYSTEMS 0130 750 Crawler Bulldozer PC1884 in BULLDOZER MASTER TRAX

№	Number	Qty	Name	Options
1	19H2431	4	CAP SCREW	HS, SAE 8, 3/4" X 2-1/4"
2	R78019	4	Washer	(SUB FOR T21397)
3	T49338	1	CAP	PIVOT SHAFT BRACKET
4	T49337	2	Retainer
5	T49336	1	Dowel Pin
5	T112635	1	Pin	(COMPONENT OF AT113499 AND AT113500)
6	JD7759	1	Lubrication Fitting	STRAIGHT, 1/8"
7	AT150501	1	Shaft	(SUB FOR AT47978 AND AT113500) L.H. (NOT ILLUSTRATED) (STANDARD AND WIDE TRACK)
7	AT113498	1	SHAFT	(SUB FOR AT70259) L.H. (NOT ILLUSTRATED) (LOW GROUND PRESSURE TRACK)
7	AT150499	1	Shaft	(SUB FOR AT47979 AND AT113499) R.H.
7	AT113497	1	SHAFT	(SUB FOR AT70261) R.H. (LOW GROUND PRESSURE TRACK)
8	19H3529	4	Cap Screw	HS, SAE 8, 1" X 8"
9	T49331	1	Round Retainer	PIVOT SHAFT SEAL
10	[]	1		A-FRAME, R.H. (SUB AT47980)
10	[]	1		A-FRAME, L.H. (SUB AT47981) (NOT ILLUSTRATED)
11	AT47982	2	Seal
12	T49325	1	Bushing
13	AT47980	1	Bearing	A-FRAME, R.H.
13	AT47981	1	Bearing	A-FRAME, L.H. (NOT ILLUSTRATED)
14	T49334	8	SHIM	R.H. PIVOT SHAFT (1.8M (74") GAUGE TRACK)
14	T49334	8	SHIM	L.H. PIVOT SHAFT (1.8M (74") GAUGE TRACK)
14	T73765	8	SHIM	R.H. PIVOT SHAFT (1.6M (64") GAUGE TRACK) (LOW GROUND PRESSURE TRACK)
14	T49334	8	SHIM	L.H. PIVOT SHAFT (1.6M (64") GAUGE TRACK) (NOT ILLUSTRATED) (LOW GROUND PRESSURE TRACK)
15	T49333	1	BRACKET	INNER MOUNTING, (SUB T112648 AND (5) T49334)
15	T112648	1	Bracket	(SUB FOR T62120) INNER MOUNTING
16	T75690	8	Washer	(SUB FOR T48736, THIS APPLICATION)
17	08H4154	4	BOLT	1" X 6-1/2"
17	19H2101	4	Cap Screw	1" X 6"
18	T49327	1	PIN	(WITH OLDER PIVOT SHAFT)
18	T112635	1	Pin	(USE WITH AT150499 AND AT150501)
19	T82267	1	Washer	(SUB FOR T78941) (ALSO ORDER U42703)
20	U42703	1	O-Ring