AtlasCarParts

CRANKSHAFT, IDLER GEARS AND MAIN BEARINGS [01D05] CRANKSHAFT AND MAIN BEARINGS 0401 444 Loader PC1583 in LOADER, FOUR-WHEEL DRIVE 444


  1. Home
  2. Construction And Forestry
  3. LOADER, FOUR-WHEEL DRIVE
  4. LOADER, FOUR-WHEEL DRIVE 444
  5. 444 Loader PC1583
  6. CRANKSHAFT AND MAIN BEARINGS 0401
  7. CRANKSHAFT, IDLER GEARS AND MAIN BEARINGS [01D05]
CRANKSHAFT, IDLER GEARS AND MAIN BEARINGS [01D05]

Parts list:

 №  Number Qty Name Options
1   RE24959   1  SEAL (USE IF AVAILABLE) (SUB FOR RE17831)  
1   RE44574   1  Seal (SUB FOR RE24959)  
2   R48685   1  Dowel Pin (SUB FOR A120R)  
3   26H72   1  Shaft Key 1/8" X 5/8"  
4   T20094   1  Helical Gear (24 TEETH)  
5   []   1  RE45541,MARKED R108679 NO LONGER AVAILABLE (SUB FOR AT22562,MARKED T23266 OR T23267) SUB RE54130 CRANKSHAFT KIT.  
6   T26324   2  THRUST WASHER  
7   R109863   1  Shaft (SUB FOR T26323 AND R89824)  
8   34H283   1  Spring Pin 3/16" X 1-1/8"  
9   T20034   1  Bushing  
10   AR91660   1  Gear (MARKED R70182) (SUB FOR AT18009) (MARKED T20029) (55 TEETH)  
11   T26326   2  THRUST WASHER  
12   T26327   1  Screw  
13   R81989   1  Sleeve (SUB FOR T23270) (ALSO ORDER H35244)  
13   H35244   1  Ring (USE WITH R81989)  
14   AR67942   1  Seal  
15   T20046   1  Oil Slinger  
16A   T26325   2  SCREW  
16B   19H3183   1  CAP SCREW HS, SAE 8, 1/2" X 2-1/8"  
17A   R76126   2  Washer (SUB FOR R42364)  
17B   R100105   1  Washer  
18   T26321   1  Bushing  
19   AT24252   1  GEAR LOWER IDLER, (MARKED T26322) (45 TEETH)  
20   34H286   1  Spring Pin 3/16" X 1-1/2"  
21   AT21140   6  Bearing (SET OF (2) T23214)  
21   []   6  ( AT21108 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE, PLAIN (SET OF (2) T23552)  
21   AT21110   6  BEARING 0.25 MM (.010") UNDERSIZE, PLAIN (SET OF (2) T23554)  
21   AT21112   6  BEARING 0.51 MM (.020") UNDERSIZE, PLAIN (SET OF (2) T23556)  
21   AT21114   6  BEARING 0.76 MM (.030") UNDERSIZE, PLAIN (SET OF (2) T23558)  
22   AT21139   1  BEARING (SET OF (2) T23215)  
22   []   1  ( AT21130 NO LONGER AVAILABLE) 0.05 MM (.002") UNDERSIZE, REAR (SET OF (2) T23574)  
22   AT21132   1  BEARING 0.25 MM (.010") UNDERSIZE, REAR (SET OF (2) T23576)  
22   AT21134   1  BEARING 0.51 MM (.020") UNDERSIZE, REAR (SET OF (2) T23578)  
22   AT21136   1  BEARING 0.76 MM (.030") UNDERSIZE, REAR (SET OF (2) T23580)  
23   T26323   1  SHAFT  
23   R109863   1  Shaft (SUB FOR R89824)  
24   14H865   1  Nut 1/2"  

Next page:

0401-1C
REPLACEMENT CRANKSHAFT KIT CRANKSHAFT ,BEARING KIT(SHORT NOSE)LONG STROKE [01D07]
REPLACEMENT CRANKSHAFT KIT CRANKSHAFT ,BEARING KIT(SHORT NOSE)LONG STROKE [01D07]
0401-2
UNDERSIZE CRAKSHAFT AND BEARING KIT [01D08]
UNDERSIZE CRAKSHAFT AND BEARING KIT [01D08]