GRAPPLE CONTROLS [03C21] CONTROL LINKAGE 3815 540B Log Skidder and Grapple Log Skidder PC1524 in SKIDDER, LOG 540B

№	Number	Qty	Name	Options
1	14H882	1	Nut	5/16"
2	11M7081	5	Cotter Pin	2.500 X 20 MM
3	T54488	1	PIN FASTENER
4	M359T	4	Washer
5	19H2676	2	Cap Screw	3/8" X 1"
6	T51582	1	BASE
7	24H1275	5	Washer	1-1/64" X 1-1/2" X 0.075"
8	T51586	1	LEVER	ROTATE
9	25H547	1	GROOVE PIN	1/4" X 1-1/4"
10	24H1362	4	Washer	41/64" X 1" X 0.075"
11	24H1305	2	Washer	13/32" X 13/16" X 0.065"
12	14H812	2	NUT	3/8"
13	T83092	1	PAD	(SUB FOR T51592)
14	T46879	8	PLUG
15	19H1948	4	Cap Screw	1/4" X 3/4"
16	24H1287	4	Washer	9/32" X 5/8" X 0.065"
17	14H786	4	Nut	1/4"
18	T51591	1	ANGLE
19A	T51581	2	ROD	(SUB T81268, T81269, M84802, 14H732 AND 14H1008)
19B	T81268	2	LEVER
20	14H934	2	Nut	7/16"
21	11M7077	2	Cotter Pin	1.600 X 25 MM
22	T11713	2	PIN	PIVOT SHAFT TO YOKE
23	T51589	2	YOKE	ADJUSTABLE
24	T19155	3	Pin Fastener	SPOOL TO ROD END
25A	T51580	1	ROD	LIFT LINKAGE, (SUB T81267, T81269, M84802, AT53798, 14H732 AND 14H1008)
25B	T81267	1	ROD
26	14H882	1	Nut	5/16"
27	AT49994	1	SHAFT	PIVOT, ROTATE LEVER
28	AT49995	1	SHAFT	PIVOT, LIFT AND GRAPPLE
29	AT48548	1	Ball Joint	(USE WITH T51580 AND T51581)
29	AT53798	1	BALL JOINT	(USE WITH T81267 AND T81268)
30	T37880	2	BUSHING
31	E13979	2	Bushing
32	T51585	1	LEVER	LIFT AND GRAPPLE
33	11M7083	1	Cotter Pin	3.200 X 50 MM
34	T78535	1	LABEL
35	14H732	3	Nut	3/8", (USE WITH T81267 AND T81268)
36	M84802	3	Turnbuckle	(USE WITH T81267 AND T81268)
37	14H1008	3	Nut	3/8", (USE WITH T81267 AND T81268)
38	T81269	3	EYEBOLT	(USE WITH T81267 AND T81268)

1

1

Nut

5/16"

2

5

Cotter Pin

2.500 X 20 MM

3